<?php
/*
 * Copyright 2018 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * GENERATED CODE WARNING
 * Generated by gapic-generator-php from the file
 * https://github.com/googleapis/googleapis/blob/master/google/cloud/tasks/v2beta2/cloudtasks.proto
 * Updates to the above are reflected here through a refresh process.
 *
 * @experimental
 */

namespace Google\Cloud\Tasks\V2beta2\Gapic;

use Google\ApiCore\ApiException;
use Google\ApiCore\CredentialsWrapper;
use Google\ApiCore\GapicClientTrait;
use Google\ApiCore\PathTemplate;
use Google\ApiCore\RequestParamsHeaderDescriptor;
use Google\ApiCore\RetrySettings;
use Google\ApiCore\Transport\TransportInterface;
use Google\ApiCore\ValidationException;
use Google\Auth\FetchAuthTokenInterface;
use Google\Cloud\Iam\V1\GetIamPolicyRequest;
use Google\Cloud\Iam\V1\GetPolicyOptions;
use Google\Cloud\Iam\V1\Policy;
use Google\Cloud\Iam\V1\SetIamPolicyRequest;
use Google\Cloud\Iam\V1\TestIamPermissionsRequest;
use Google\Cloud\Iam\V1\TestIamPermissionsResponse;
use Google\Cloud\Tasks\V2beta2\AcknowledgeTaskRequest;
use Google\Cloud\Tasks\V2beta2\CancelLeaseRequest;
use Google\Cloud\Tasks\V2beta2\CreateQueueRequest;
use Google\Cloud\Tasks\V2beta2\CreateTaskRequest;
use Google\Cloud\Tasks\V2beta2\DeleteQueueRequest;
use Google\Cloud\Tasks\V2beta2\DeleteTaskRequest;
use Google\Cloud\Tasks\V2beta2\GetQueueRequest;
use Google\Cloud\Tasks\V2beta2\GetTaskRequest;
use Google\Cloud\Tasks\V2beta2\LeaseTasksRequest;
use Google\Cloud\Tasks\V2beta2\LeaseTasksResponse;
use Google\Cloud\Tasks\V2beta2\ListQueuesRequest;
use Google\Cloud\Tasks\V2beta2\ListQueuesResponse;
use Google\Cloud\Tasks\V2beta2\ListTasksRequest;
use Google\Cloud\Tasks\V2beta2\ListTasksResponse;
use Google\Cloud\Tasks\V2beta2\PauseQueueRequest;
use Google\Cloud\Tasks\V2beta2\PurgeQueueRequest;
use Google\Cloud\Tasks\V2beta2\Queue;
use Google\Cloud\Tasks\V2beta2\RenewLeaseRequest;
use Google\Cloud\Tasks\V2beta2\ResumeQueueRequest;
use Google\Cloud\Tasks\V2beta2\RunTaskRequest;
use Google\Cloud\Tasks\V2beta2\Task;
use Google\Cloud\Tasks\V2beta2\Task\View;
use Google\Cloud\Tasks\V2beta2\UpdateQueueRequest;
use Google\Protobuf\Duration;
use Google\Protobuf\FieldMask;
use Google\Protobuf\GPBEmpty;
use Google\Protobuf\Timestamp;

/**
 * Service Description: Cloud Tasks allows developers to manage the execution of background
 * work in their applications.
 *
 * This class provides the ability to make remote calls to the backing service through method
 * calls that map to API methods. Sample code to get started:
 *
 * ```
 * $cloudTasksClient = new CloudTasksClient();
 * try {
 *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
 *     $scheduleTime = new Timestamp();
 *     $cloudTasksClient->acknowledgeTask($formattedName, $scheduleTime);
 * } finally {
 *     $cloudTasksClient->close();
 * }
 * ```
 *
 * Many parameters require resource names to be formatted in a particular way. To
 * assist with these names, this class includes a format method for each type of
 * name, and additionally a parseName method to extract the individual identifiers
 * contained within formatted names that are returned by the API.
 *
 * @experimental
 */
class CloudTasksGapicClient
{
    use GapicClientTrait;

    /** The name of the service. */
    const SERVICE_NAME = 'google.cloud.tasks.v2beta2.CloudTasks';

    /** The default address of the service. */
    const SERVICE_ADDRESS = 'cloudtasks.googleapis.com';

    /** The default port of the service. */
    const DEFAULT_SERVICE_PORT = 443;

    /** The name of the code generator, to be included in the agent header. */
    const CODEGEN_NAME = 'gapic';

    /** The default scopes required by the service. */
    public static $serviceScopes = [
        'https://www.googleapis.com/auth/cloud-platform',
    ];

    private static $locationNameTemplate;

    private static $queueNameTemplate;

    private static $taskNameTemplate;

    private static $pathTemplateMap;

    private static function getClientDefaults()
    {
        return [
            'serviceName' => self::SERVICE_NAME,
            'apiEndpoint' => self::SERVICE_ADDRESS . ':' . self::DEFAULT_SERVICE_PORT,
            'clientConfig' => __DIR__ . '/../resources/cloud_tasks_client_config.json',
            'descriptorsConfigPath' => __DIR__ . '/../resources/cloud_tasks_descriptor_config.php',
            'gcpApiConfigPath' => __DIR__ . '/../resources/cloud_tasks_grpc_config.json',
            'credentialsConfig' => [
                'defaultScopes' => self::$serviceScopes,
            ],
            'transportConfig' => [
                'rest' => [
                    'restClientConfigPath' => __DIR__ . '/../resources/cloud_tasks_rest_client_config.php',
                ],
            ],
        ];
    }

    private static function getLocationNameTemplate()
    {
        if (self::$locationNameTemplate == null) {
            self::$locationNameTemplate = new PathTemplate('projects/{project}/locations/{location}');
        }

        return self::$locationNameTemplate;
    }

    private static function getProjectNameTemplate()
    {
        if (null == self::$projectNameTemplate) {
            self::$projectNameTemplate = new PathTemplate('projects/{project}');
        }

        return self::$projectNameTemplate;
    }

    private static function getQueueNameTemplate()
    {
        if (self::$queueNameTemplate == null) {
            self::$queueNameTemplate = new PathTemplate('projects/{project}/locations/{location}/queues/{queue}');
        }

        return self::$queueNameTemplate;
    }

    private static function getTaskNameTemplate()
    {
        if (self::$taskNameTemplate == null) {
            self::$taskNameTemplate = new PathTemplate('projects/{project}/locations/{location}/queues/{queue}/tasks/{task}');
        }

        return self::$taskNameTemplate;
    }

    private static function getPathTemplateMap()
    {
        if (self::$pathTemplateMap == null) {
            self::$pathTemplateMap = [
                'location' => self::getLocationNameTemplate(),
                'project' => self::getProjectNameTemplate(),
                'queue' => self::getQueueNameTemplate(),
                'task' => self::getTaskNameTemplate(),
            ];
        }

        return self::$pathTemplateMap;
    }

    /**
     * Formats a string containing the fully-qualified path to represent a location
     * resource.
     *
     * @param string $project
     * @param string $location
     *
     * @return string The formatted location resource.
     *
     * @experimental
     */
    public static function locationName($project, $location)
    {
        return self::getLocationNameTemplate()->render([
            'project' => $project,
            'location' => $location,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a queue
     * resource.
     *
     * @param string $project
     * @param string $location
     * @param string $queue
     *
     * @return string The formatted queue resource.
     *
     * @experimental
     */
    public static function queueName($project, $location, $queue)
    {
        return self::getQueueNameTemplate()->render([
            'project' => $project,
            'location' => $location,
            'queue' => $queue,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a task
     * resource.
     *
     * @param string $project
     * @param string $location
     * @param string $queue
     * @param string $task
     *
     * @return string The formatted task resource.
     *
     * @experimental
     */
    public static function taskName($project, $location, $queue, $task)
    {
        return self::getTaskNameTemplate()->render([
            'project' => $project,
            'location' => $location,
            'queue' => $queue,
            'task' => $task,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent
     * a project resource.
     *
     * @param string $project
     *
     * @return string The formatted project resource.
     */
    public static function projectName($project)
    {
        return self::getProjectNameTemplate()->render([
            'project' => $project,
        ]);
    }

    /**
     * Parses a formatted name string and returns an associative array of the components in the name.
     * The following name formats are supported:
     * Template: Pattern
     * - location: projects/{project}/locations/{location}
     * - queue: projects/{project}/locations/{location}/queues/{queue}
     * - task: projects/{project}/locations/{location}/queues/{queue}/tasks/{task}
     *
     * The optional $template argument can be supplied to specify a particular pattern,
     * and must match one of the templates listed above. If no $template argument is
     * provided, or if the $template argument does not match one of the templates
     * listed, then parseName will check each of the supported templates, and return
     * the first match.
     *
     * @param string $formattedName The formatted name string
     * @param string $template      Optional name of template to match
     *
     * @return array An associative array from name component IDs to component values.
     *
     * @throws ValidationException If $formattedName could not be matched.
     *
     * @experimental
     */
    public static function parseName($formattedName, $template = null)
    {
        $templateMap = self::getPathTemplateMap();
        if ($template) {
            if (!isset($templateMap[$template])) {
                throw new ValidationException("Template name $template does not exist");
            }

            return $templateMap[$template]->match($formattedName);
        }

        foreach ($templateMap as $templateName => $pathTemplate) {
            try {
                return $pathTemplate->match($formattedName);
            } catch (ValidationException $ex) {
                // Swallow the exception to continue trying other path templates
            }
        }

        throw new ValidationException("Input did not match any known format. Input: $formattedName");
    }

    /**
     * Constructor.
     *
     * @param array $options {
     *     Optional. Options for configuring the service API wrapper.
     *
     *     @type string $apiEndpoint
     *           The address of the API remote host. May optionally include the port, formatted
     *           as "<uri>:<port>". Default 'cloudtasks.googleapis.com:443'.
     *     @type string|array|FetchAuthTokenInterface|CredentialsWrapper $credentials
     *           The credentials to be used by the client to authorize API calls. This option
     *           accepts either a path to a credentials file, or a decoded credentials file as a
     *           PHP array.
     *           *Advanced usage*: In addition, this option can also accept a pre-constructed
     *           {@see \Google\Auth\FetchAuthTokenInterface} object or
     *           {@see \Google\ApiCore\CredentialsWrapper} object. Note that when one of these
     *           objects are provided, any settings in $credentialsConfig will be ignored.
     *     @type array $credentialsConfig
     *           Options used to configure credentials, including auth token caching, for the
     *           client. For a full list of supporting configuration options, see
     *           {@see \Google\ApiCore\CredentialsWrapper::build()} .
     *     @type bool $disableRetries
     *           Determines whether or not retries defined by the client configuration should be
     *           disabled. Defaults to `false`.
     *     @type string|array $clientConfig
     *           Client method configuration, including retry settings. This option can be either
     *           a path to a JSON file, or a PHP array containing the decoded JSON data. By
     *           default this settings points to the default client config file, which is
     *           provided in the resources folder.
     *     @type string|TransportInterface $transport
     *           The transport used for executing network requests. May be either the string
     *           `rest` or `grpc`. Defaults to `grpc` if gRPC support is detected on the system.
     *           *Advanced usage*: Additionally, it is possible to pass in an already
     *           instantiated {@see \Google\ApiCore\Transport\TransportInterface} object. Note
     *           that when this object is provided, any settings in $transportConfig, and any
     *           $apiEndpoint setting, will be ignored.
     *     @type array $transportConfig
     *           Configuration options that will be used to construct the transport. Options for
     *           each supported transport type should be passed in a key for that transport. For
     *           example:
     *           $transportConfig = [
     *               'grpc' => [...],
     *               'rest' => [...],
     *           ];
     *           See the {@see \Google\ApiCore\Transport\GrpcTransport::build()} and
     *           {@see \Google\ApiCore\Transport\RestTransport::build()} methods for the
     *           supported options.
     *     @type callable $clientCertSource
     *           A callable which returns the client cert as a string. This can be used to
     *           provide a certificate and private key to the transport layer for mTLS.
     * }
     *
     * @throws ValidationException
     *
     * @experimental
     */
    public function __construct(array $options = [])
    {
        $clientOptions = $this->buildClientOptions($options);
        $this->setClientOptions($clientOptions);
    }

    /**
     * Acknowledges a pull task.
     *
     * The worker, that is, the entity that
     * [leased][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks] this task must call this method
     * to indicate that the work associated with the task has finished.
     *
     * The worker must acknowledge a task within the
     * [lease_duration][google.cloud.tasks.v2beta2.LeaseTasksRequest.lease_duration] or the lease
     * will expire and the task will become available to be leased
     * again. After the task is acknowledged, it will not be returned
     * by a later [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks],
     * [GetTask][google.cloud.tasks.v2beta2.CloudTasks.GetTask], or
     * [ListTasks][google.cloud.tasks.v2beta2.CloudTasks.ListTasks].
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
     *     $scheduleTime = new Timestamp();
     *     $cloudTasksClient->acknowledgeTask($formattedName, $scheduleTime);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string    $name         Required. The task name. For example:
     *                                `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
     * @param Timestamp $scheduleTime Required. The task's current schedule time, available in the
     *                                [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] returned by
     *                                [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks] response or
     *                                [RenewLease][google.cloud.tasks.v2beta2.CloudTasks.RenewLease] response. This restriction is
     *                                to ensure that your worker currently holds the lease.
     * @param array     $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function acknowledgeTask($name, $scheduleTime, array $optionalArgs = [])
    {
        $request = new AcknowledgeTaskRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setScheduleTime($scheduleTime);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('AcknowledgeTask', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Cancel a pull task's lease.
     *
     * The worker can use this method to cancel a task's lease by
     * setting its [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] to now. This will
     * make the task available to be leased to the next caller of
     * [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks].
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
     *     $scheduleTime = new Timestamp();
     *     $response = $cloudTasksClient->cancelLease($formattedName, $scheduleTime);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string    $name         Required. The task name. For example:
     *                                `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
     * @param Timestamp $scheduleTime Required. The task's current schedule time, available in the
     *                                [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] returned by
     *                                [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks] response or
     *                                [RenewLease][google.cloud.tasks.v2beta2.CloudTasks.RenewLease] response. This restriction is
     *                                to ensure that your worker currently holds the lease.
     * @param array     $optionalArgs {
     *     Optional.
     *
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Task
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function cancelLease($name, $scheduleTime, array $optionalArgs = [])
    {
        $request = new CancelLeaseRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setScheduleTime($scheduleTime);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CancelLease', Task::class, $optionalArgs, $request)->wait();
    }

    /**
     * Creates a queue.
     *
     * Queues created with this method allow tasks to live for a maximum of 31
     * days. After a task is 31 days old, the task will be deleted regardless of whether
     * it was dispatched or not.
     *
     * WARNING: Using this method may have unintended side effects if you are
     * using an App Engine `queue.yaml` or `queue.xml` file to manage your queues.
     * Read
     * [Overview of Queue Management and
     * queue.yaml](https://cloud.google.com/tasks/docs/queue-yaml) before using
     * this method.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedParent = $cloudTasksClient->locationName('[PROJECT]', '[LOCATION]');
     *     $queue = new Queue();
     *     $response = $cloudTasksClient->createQueue($formattedParent, $queue);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The location name in which the queue will be created.
     *                             For example: `projects/PROJECT_ID/locations/LOCATION_ID`
     *
     *                             The list of allowed locations can be obtained by calling Cloud
     *                             Tasks' implementation of
     *                             [ListLocations][google.cloud.location.Locations.ListLocations].
     * @param Queue  $queue        Required. The queue to create.
     *
     *                             [Queue's name][google.cloud.tasks.v2beta2.Queue.name] cannot be the same as an existing queue.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Queue
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function createQueue($parent, $queue, array $optionalArgs = [])
    {
        $request = new CreateQueueRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setQueue($queue);
        $requestParamHeaders['parent'] = $parent;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CreateQueue', Queue::class, $optionalArgs, $request)->wait();
    }

    /**
     * Creates a task and adds it to a queue.
     *
     * Tasks cannot be updated after creation; there is no UpdateTask command.
     *
     * * For [App Engine queues][google.cloud.tasks.v2beta2.AppEngineHttpTarget], the maximum task size is
     * 100KB.
     * * For [pull queues][google.cloud.tasks.v2beta2.PullTarget], the maximum task size is 1MB.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedParent = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $task = new Task();
     *     $response = $cloudTasksClient->createTask($formattedParent, $task);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The queue name. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
     *
     *                             The queue must already exist.
     * @param Task   $task         Required. The task to add.
     *
     *                             Task names have the following format:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`.
     *                             The user can optionally specify a task [name][google.cloud.tasks.v2beta2.Task.name]. If a
     *                             name is not specified then the system will generate a random
     *                             unique task id, which will be set in the task returned in the
     *                             [response][google.cloud.tasks.v2beta2.Task.name].
     *
     *                             If [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] is not set or is in the
     *                             past then Cloud Tasks will set it to the current time.
     *
     *                             Task De-duplication:
     *
     *                             Explicitly specifying a task ID enables task de-duplication.  If
     *                             a task's ID is identical to that of an existing task or a task
     *                             that was deleted or completed recently then the call will fail
     *                             with [ALREADY_EXISTS][google.rpc.Code.ALREADY_EXISTS].
     *                             If the task's queue was created using Cloud Tasks, then another task with
     *                             the same name can't be created for ~1hour after the original task was
     *                             deleted or completed. If the task's queue was created using queue.yaml or
     *                             queue.xml, then another task with the same name can't be created
     *                             for ~9days after the original task was deleted or completed.
     *
     *                             Because there is an extra lookup cost to identify duplicate task
     *                             names, these [CreateTask][google.cloud.tasks.v2beta2.CloudTasks.CreateTask] calls have significantly
     *                             increased latency. Using hashed strings for the task id or for
     *                             the prefix of the task id is recommended. Choosing task ids that
     *                             are sequential or have sequential prefixes, for example using a
     *                             timestamp, causes an increase in latency and error rates in all
     *                             task commands. The infrastructure relies on an approximately
     *                             uniform distribution of task ids to store and serve tasks
     *                             efficiently.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Task
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function createTask($parent, $task, array $optionalArgs = [])
    {
        $request = new CreateTaskRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setTask($task);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CreateTask', Task::class, $optionalArgs, $request)->wait();
    }

    /**
     * Deletes a queue.
     *
     * This command will delete the queue even if it has tasks in it.
     *
     * Note: If you delete a queue, a queue with the same name can't be created
     * for 7 days.
     *
     * WARNING: Using this method may have unintended side effects if you are
     * using an App Engine `queue.yaml` or `queue.xml` file to manage your queues.
     * Read
     * [Overview of Queue Management and
     * queue.yaml](https://cloud.google.com/tasks/docs/queue-yaml) before using
     * this method.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $cloudTasksClient->deleteQueue($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The queue name. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function deleteQueue($name, array $optionalArgs = [])
    {
        $request = new DeleteQueueRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteQueue', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Deletes a task.
     *
     * A task can be deleted if it is scheduled or dispatched. A task
     * cannot be deleted if it has completed successfully or permanently
     * failed.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
     *     $cloudTasksClient->deleteTask($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The task name. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function deleteTask($name, array $optionalArgs = [])
    {
        $request = new DeleteTaskRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteTask', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets the access control policy for a [Queue][google.cloud.tasks.v2beta2.Queue].
     * Returns an empty policy if the resource exists and does not have a policy
     * set.
     *
     * Authorization requires the following
     * [Google IAM](https://cloud.google.com/iam) permission on the specified
     * resource parent:
     *
     * * `cloudtasks.queues.getIamPolicy`
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $resource = 'resource';
     *     $response = $cloudTasksClient->getIamPolicy($resource);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $resource     REQUIRED: The resource for which the policy is being requested.
     *                             See the operation documentation for the appropriate value for this field.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type GetPolicyOptions $options
     *           OPTIONAL: A `GetPolicyOptions` object for specifying options to
     *           `GetIamPolicy`.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\Policy
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function getIamPolicy($resource, array $optionalArgs = [])
    {
        $request = new GetIamPolicyRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $requestParamHeaders['resource'] = $resource;
        if (isset($optionalArgs['options'])) {
            $request->setOptions($optionalArgs['options']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetIamPolicy', Policy::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets a queue.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $response = $cloudTasksClient->getQueue($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The resource name of the queue. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type FieldMask $readMask
     *           Optional. Read mask is used for a more granular control over what the API returns.
     *           If the mask is not present all fields will be returned except
     *           [Queue.stats]. [Queue.stats] will be returned only if it was  explicitly
     *           specified in the mask.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Queue
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function getQueue($name, array $optionalArgs = [])
    {
        $request = new GetQueueRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['readMask'])) {
            $request->setReadMask($optionalArgs['readMask']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetQueue', Queue::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets a task.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
     *     $response = $cloudTasksClient->getTask($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The task name. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Task
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function getTask($name, array $optionalArgs = [])
    {
        $request = new GetTaskRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetTask', Task::class, $optionalArgs, $request)->wait();
    }

    /**
     * Leases tasks from a pull queue for
     * [lease_duration][google.cloud.tasks.v2beta2.LeaseTasksRequest.lease_duration].
     *
     * This method is invoked by the worker to obtain a lease. The
     * worker must acknowledge the task via
     * [AcknowledgeTask][google.cloud.tasks.v2beta2.CloudTasks.AcknowledgeTask] after they have
     * performed the work associated with the task.
     *
     * The [payload][google.cloud.tasks.v2beta2.PullMessage.payload] is intended to store data that
     * the worker needs to perform the work associated with the task. To
     * return the payloads in the [response][google.cloud.tasks.v2beta2.LeaseTasksResponse], set
     * [response_view][google.cloud.tasks.v2beta2.LeaseTasksRequest.response_view] to
     * [FULL][google.cloud.tasks.v2beta2.Task.View.FULL].
     *
     * A maximum of 10 qps of [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks]
     * requests are allowed per
     * queue. [RESOURCE_EXHAUSTED][google.rpc.Code.RESOURCE_EXHAUSTED]
     * is returned when this limit is
     * exceeded. [RESOURCE_EXHAUSTED][google.rpc.Code.RESOURCE_EXHAUSTED]
     * is also returned when
     * [max_tasks_dispatched_per_second][google.cloud.tasks.v2beta2.RateLimits.max_tasks_dispatched_per_second]
     * is exceeded.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedParent = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $leaseDuration = new Duration();
     *     $response = $cloudTasksClient->leaseTasks($formattedParent, $leaseDuration);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string   $parent        Required. The queue name. For example:
     *                                `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
     * @param Duration $leaseDuration Required. The duration of the lease.
     *
     *                                Each task returned in the [response][google.cloud.tasks.v2beta2.LeaseTasksResponse] will
     *                                have its [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] set to the current
     *                                time plus the `lease_duration`. The task is leased until its
     *                                [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time]; thus, the task will not be
     *                                returned to another [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks] call
     *                                before its [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time].
     *
     *
     *                                After the worker has successfully finished the work associated
     *                                with the task, the worker must call via
     *                                [AcknowledgeTask][google.cloud.tasks.v2beta2.CloudTasks.AcknowledgeTask] before the
     *                                [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time]. Otherwise the task will be
     *                                returned to a later [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks] call so
     *                                that another worker can retry it.
     *
     *                                The maximum lease duration is 1 week.
     *                                `lease_duration` will be truncated to the nearest second.
     * @param array    $optionalArgs  {
     *     Optional.
     *
     *     @type int $maxTasks
     *           The maximum number of tasks to lease.
     *
     *           The system will make a best effort to return as close to as
     *           `max_tasks` as possible.
     *
     *           The largest that `max_tasks` can be is 1000.
     *
     *           The maximum total size of a [lease tasks response][google.cloud.tasks.v2beta2.LeaseTasksResponse] is
     *           32 MB. If the sum of all task sizes requested reaches this limit,
     *           fewer tasks than requested are returned.
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type string $filter
     *           `filter` can be used to specify a subset of tasks to lease.
     *
     *           When `filter` is set to `tag=<my-tag>` then the
     *           [response][google.cloud.tasks.v2beta2.LeaseTasksResponse] will contain only tasks whose
     *           [tag][google.cloud.tasks.v2beta2.PullMessage.tag] is equal to `<my-tag>`. `<my-tag>` must be
     *           less than 500 characters.
     *
     *           When `filter` is set to `tag_function=oldest_tag()`, only tasks which have
     *           the same tag as the task with the oldest
     *           [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] will be returned.
     *
     *           Grammar Syntax:
     *
     *           * `filter = "tag=" tag | "tag_function=" function`
     *
     *           * `tag = string`
     *
     *           * `function = "oldest_tag()"`
     *
     *           The `oldest_tag()` function returns tasks which have the same tag as the
     *           oldest task (ordered by schedule time).
     *
     *           SDK compatibility: Although the SDK allows tags to be either
     *           string or
     *           [bytes](https://cloud.google.com/appengine/docs/standard/java/javadoc/com/google/appengine/api/taskqueue/TaskOptions.html#tag-byte:A-),
     *           only UTF-8 encoded tags can be used in Cloud Tasks. Tag which
     *           aren't UTF-8 encoded can't be used in the
     *           [filter][google.cloud.tasks.v2beta2.LeaseTasksRequest.filter] and the task's
     *           [tag][google.cloud.tasks.v2beta2.PullMessage.tag] will be displayed as empty in Cloud Tasks.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\LeaseTasksResponse
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function leaseTasks($parent, $leaseDuration, array $optionalArgs = [])
    {
        $request = new LeaseTasksRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setLeaseDuration($leaseDuration);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['maxTasks'])) {
            $request->setMaxTasks($optionalArgs['maxTasks']);
        }

        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        if (isset($optionalArgs['filter'])) {
            $request->setFilter($optionalArgs['filter']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('LeaseTasks', LeaseTasksResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Lists queues.
     *
     * Queues are returned in lexicographical order.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedParent = $cloudTasksClient->locationName('[PROJECT]', '[LOCATION]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $cloudTasksClient->listQueues($formattedParent);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $cloudTasksClient->listQueues($formattedParent);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The location name.
     *                             For example: `projects/PROJECT_ID/locations/LOCATION_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type string $filter
     *           `filter` can be used to specify a subset of queues. Any [Queue][google.cloud.tasks.v2beta2.Queue]
     *           field can be used as a filter and several operators as supported.
     *           For example: `<=, <, >=, >, !=, =, :`. The filter syntax is the same as
     *           described in
     *           [Stackdriver's Advanced Logs
     *           Filters](https://cloud.google.com/logging/docs/view/advanced_filters).
     *
     *           Sample filter "app_engine_http_target: *".
     *
     *           Note that using filters might cause fewer queues than the
     *           requested_page size to be returned.
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type FieldMask $readMask
     *           Optional. Read mask is used for a more granular control over what the API returns.
     *           If the mask is not present all fields will be returned except
     *           [Queue.stats]. [Queue.stats] will be returned only if it was  explicitly
     *           specified in the mask.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function listQueues($parent, array $optionalArgs = [])
    {
        $request = new ListQueuesRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['filter'])) {
            $request->setFilter($optionalArgs['filter']);
        }

        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        if (isset($optionalArgs['readMask'])) {
            $request->setReadMask($optionalArgs['readMask']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListQueues', $optionalArgs, ListQueuesResponse::class, $request);
    }

    /**
     * Lists the tasks in a queue.
     *
     * By default, only the [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC] view is retrieved
     * due to performance considerations;
     * [response_view][google.cloud.tasks.v2beta2.ListTasksRequest.response_view] controls the
     * subset of information which is returned.
     *
     * The tasks may be returned in any order. The ordering may change at any
     * time.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedParent = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $cloudTasksClient->listTasks($formattedParent);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $cloudTasksClient->listTasks($formattedParent);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The queue name. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function listTasks($parent, array $optionalArgs = [])
    {
        $request = new ListTasksRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListTasks', $optionalArgs, ListTasksResponse::class, $request);
    }

    /**
     * Pauses the queue.
     *
     * If a queue is paused then the system will stop dispatching tasks
     * until the queue is resumed via
     * [ResumeQueue][google.cloud.tasks.v2beta2.CloudTasks.ResumeQueue]. Tasks can still be added
     * when the queue is paused. A queue is paused if its
     * [state][google.cloud.tasks.v2beta2.Queue.state] is [PAUSED][google.cloud.tasks.v2beta2.Queue.State.PAUSED].
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $response = $cloudTasksClient->pauseQueue($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The queue name. For example:
     *                             `projects/PROJECT_ID/location/LOCATION_ID/queues/QUEUE_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Queue
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function pauseQueue($name, array $optionalArgs = [])
    {
        $request = new PauseQueueRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('PauseQueue', Queue::class, $optionalArgs, $request)->wait();
    }

    /**
     * Purges a queue by deleting all of its tasks.
     *
     * All tasks created before this method is called are permanently deleted.
     *
     * Purge operations can take up to one minute to take effect. Tasks
     * might be dispatched before the purge takes effect. A purge is irreversible.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $response = $cloudTasksClient->purgeQueue($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The queue name. For example:
     *                             `projects/PROJECT_ID/location/LOCATION_ID/queues/QUEUE_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Queue
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function purgeQueue($name, array $optionalArgs = [])
    {
        $request = new PurgeQueueRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('PurgeQueue', Queue::class, $optionalArgs, $request)->wait();
    }

    /**
     * Renew the current lease of a pull task.
     *
     * The worker can use this method to extend the lease by a new
     * duration, starting from now. The new task lease will be
     * returned in the task's [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time].
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
     *     $scheduleTime = new Timestamp();
     *     $leaseDuration = new Duration();
     *     $response = $cloudTasksClient->renewLease($formattedName, $scheduleTime, $leaseDuration);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string    $name          Required. The task name. For example:
     *                                 `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
     * @param Timestamp $scheduleTime  Required. The task's current schedule time, available in the
     *                                 [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] returned by
     *                                 [LeaseTasks][google.cloud.tasks.v2beta2.CloudTasks.LeaseTasks] response or
     *                                 [RenewLease][google.cloud.tasks.v2beta2.CloudTasks.RenewLease] response. This restriction is
     *                                 to ensure that your worker currently holds the lease.
     * @param Duration  $leaseDuration Required. The desired new lease duration, starting from now.
     *
     *
     *                                 The maximum lease duration is 1 week.
     *                                 `lease_duration` will be truncated to the nearest second.
     * @param array     $optionalArgs  {
     *     Optional.
     *
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Task
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function renewLease($name, $scheduleTime, $leaseDuration, array $optionalArgs = [])
    {
        $request = new RenewLeaseRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setScheduleTime($scheduleTime);
        $request->setLeaseDuration($leaseDuration);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('RenewLease', Task::class, $optionalArgs, $request)->wait();
    }

    /**
     * Resume a queue.
     *
     * This method resumes a queue after it has been
     * [PAUSED][google.cloud.tasks.v2beta2.Queue.State.PAUSED] or
     * [DISABLED][google.cloud.tasks.v2beta2.Queue.State.DISABLED]. The state of a queue is stored
     * in the queue's [state][google.cloud.tasks.v2beta2.Queue.state]; after calling this method it
     * will be set to [RUNNING][google.cloud.tasks.v2beta2.Queue.State.RUNNING].
     *
     * WARNING: Resuming many high-QPS queues at the same time can
     * lead to target overloading. If you are resuming high-QPS
     * queues, follow the 500/50/5 pattern described in
     * [Managing Cloud Tasks Scaling
     * Risks](https://cloud.google.com/tasks/docs/manage-cloud-task-scaling).
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->queueName('[PROJECT]', '[LOCATION]', '[QUEUE]');
     *     $response = $cloudTasksClient->resumeQueue($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The queue name. For example:
     *                             `projects/PROJECT_ID/location/LOCATION_ID/queues/QUEUE_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Queue
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function resumeQueue($name, array $optionalArgs = [])
    {
        $request = new ResumeQueueRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('ResumeQueue', Queue::class, $optionalArgs, $request)->wait();
    }

    /**
     * Forces a task to run now.
     *
     * When this method is called, Cloud Tasks will dispatch the task, even if
     * the task is already running, the queue has reached its [RateLimits][google.cloud.tasks.v2beta2.RateLimits] or
     * is [PAUSED][google.cloud.tasks.v2beta2.Queue.State.PAUSED].
     *
     * This command is meant to be used for manual debugging. For
     * example, [RunTask][google.cloud.tasks.v2beta2.CloudTasks.RunTask] can be used to retry a failed
     * task after a fix has been made or to manually force a task to be
     * dispatched now.
     *
     * The dispatched task is returned. That is, the task that is returned
     * contains the [status][google.cloud.tasks.v2beta2.Task.status] after the task is dispatched but
     * before the task is received by its target.
     *
     * If Cloud Tasks receives a successful response from the task's
     * target, then the task will be deleted; otherwise the task's
     * [schedule_time][google.cloud.tasks.v2beta2.Task.schedule_time] will be reset to the time that
     * [RunTask][google.cloud.tasks.v2beta2.CloudTasks.RunTask] was called plus the retry delay specified
     * in the queue's [RetryConfig][google.cloud.tasks.v2beta2.RetryConfig].
     *
     * [RunTask][google.cloud.tasks.v2beta2.CloudTasks.RunTask] returns
     * [NOT_FOUND][google.rpc.Code.NOT_FOUND] when it is called on a
     * task that has already succeeded or permanently failed.
     *
     * [RunTask][google.cloud.tasks.v2beta2.CloudTasks.RunTask] cannot be called on a
     * [pull task][google.cloud.tasks.v2beta2.PullMessage].
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $formattedName = $cloudTasksClient->taskName('[PROJECT]', '[LOCATION]', '[QUEUE]', '[TASK]');
     *     $response = $cloudTasksClient->runTask($formattedName);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The task name. For example:
     *                             `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $responseView
     *           The response_view specifies which subset of the [Task][google.cloud.tasks.v2beta2.Task] will be
     *           returned.
     *
     *           By default response_view is [BASIC][google.cloud.tasks.v2beta2.Task.View.BASIC]; not all
     *           information is retrieved by default because some data, such as
     *           payloads, might be desirable to return only when needed because
     *           of its large size or because of the sensitivity of data that it
     *           contains.
     *
     *           Authorization for [FULL][google.cloud.tasks.v2beta2.Task.View.FULL] requires
     *           `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
     *           permission on the [Task][google.cloud.tasks.v2beta2.Task] resource.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Tasks\V2beta2\Task\View}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Task
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function runTask($name, array $optionalArgs = [])
    {
        $request = new RunTaskRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['responseView'])) {
            $request->setResponseView($optionalArgs['responseView']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('RunTask', Task::class, $optionalArgs, $request)->wait();
    }

    /**
     * Sets the access control policy for a [Queue][google.cloud.tasks.v2beta2.Queue]. Replaces any existing
     * policy.
     *
     * Note: The Cloud Console does not check queue-level IAM permissions yet.
     * Project-level permissions are required to use the Cloud Console.
     *
     * Authorization requires the following
     * [Google IAM](https://cloud.google.com/iam) permission on the specified
     * resource parent:
     *
     * * `cloudtasks.queues.setIamPolicy`
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $resource = 'resource';
     *     $policy = new Policy();
     *     $response = $cloudTasksClient->setIamPolicy($resource, $policy);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string $resource     REQUIRED: The resource for which the policy is being specified.
     *                             See the operation documentation for the appropriate value for this field.
     * @param Policy $policy       REQUIRED: The complete policy to be applied to the `resource`. The size of
     *                             the policy is limited to a few 10s of KB. An empty policy is a
     *                             valid policy but certain Cloud Platform services (such as Projects)
     *                             might reject them.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type FieldMask $updateMask
     *           OPTIONAL: A FieldMask specifying which fields of the policy to modify. Only
     *           the fields in the mask will be modified. If no mask is provided, the
     *           following default mask is used:
     *
     *           `paths: "bindings, etag"`
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\Policy
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function setIamPolicy($resource, $policy, array $optionalArgs = [])
    {
        $request = new SetIamPolicyRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $request->setPolicy($policy);
        $requestParamHeaders['resource'] = $resource;
        if (isset($optionalArgs['updateMask'])) {
            $request->setUpdateMask($optionalArgs['updateMask']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('SetIamPolicy', Policy::class, $optionalArgs, $request)->wait();
    }

    /**
     * Returns permissions that a caller has on a [Queue][google.cloud.tasks.v2beta2.Queue].
     * If the resource does not exist, this will return an empty set of
     * permissions, not a [NOT_FOUND][google.rpc.Code.NOT_FOUND] error.
     *
     * Note: This operation is designed to be used for building permission-aware
     * UIs and command-line tools, not for authorization checking. This operation
     * may "fail open" without warning.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $resource = 'resource';
     *     $permissions = [];
     *     $response = $cloudTasksClient->testIamPermissions($resource, $permissions);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param string   $resource     REQUIRED: The resource for which the policy detail is being requested.
     *                               See the operation documentation for the appropriate value for this field.
     * @param string[] $permissions  The set of permissions to check for the `resource`. Permissions with
     *                               wildcards (such as '*' or 'storage.*') are not allowed. For more
     *                               information see
     *                               [IAM Overview](https://cloud.google.com/iam/docs/overview#permissions).
     * @param array    $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\TestIamPermissionsResponse
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function testIamPermissions($resource, $permissions, array $optionalArgs = [])
    {
        $request = new TestIamPermissionsRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $request->setPermissions($permissions);
        $requestParamHeaders['resource'] = $resource;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('TestIamPermissions', TestIamPermissionsResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Updates a queue.
     *
     * This method creates the queue if it does not exist and updates
     * the queue if it does exist.
     *
     * Queues created with this method allow tasks to live for a maximum of 31
     * days. After a task is 31 days old, the task will be deleted regardless of whether
     * it was dispatched or not.
     *
     * WARNING: Using this method may have unintended side effects if you are
     * using an App Engine `queue.yaml` or `queue.xml` file to manage your queues.
     * Read
     * [Overview of Queue Management and
     * queue.yaml](https://cloud.google.com/tasks/docs/queue-yaml) before using
     * this method.
     *
     * Sample code:
     * ```
     * $cloudTasksClient = new CloudTasksClient();
     * try {
     *     $queue = new Queue();
     *     $response = $cloudTasksClient->updateQueue($queue);
     * } finally {
     *     $cloudTasksClient->close();
     * }
     * ```
     *
     * @param Queue $queue        Required. The queue to create or update.
     *
     *                            The queue's [name][google.cloud.tasks.v2beta2.Queue.name] must be specified.
     *
     *                            Output only fields cannot be modified using UpdateQueue.
     *                            Any value specified for an output only field will be ignored.
     *                            The queue's [name][google.cloud.tasks.v2beta2.Queue.name] cannot be changed.
     * @param array $optionalArgs {
     *     Optional.
     *
     *     @type FieldMask $updateMask
     *           A mask used to specify which fields of the queue are being updated.
     *
     *           If empty, then all fields will be updated.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Tasks\V2beta2\Queue
     *
     * @throws ApiException if the remote call fails
     *
     * @experimental
     */
    public function updateQueue($queue, array $optionalArgs = [])
    {
        $request = new UpdateQueueRequest();
        $requestParamHeaders = [];
        $request->setQueue($queue);
        $requestParamHeaders['queue.name'] = $queue->getName();
        if (isset($optionalArgs['updateMask'])) {
            $request->setUpdateMask($optionalArgs['updateMask']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('UpdateQueue', Queue::class, $optionalArgs, $request)->wait();
    }
}