<?php
/*
 * Copyright 2016 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * GENERATED CODE WARNING
 * Generated by gapic-generator-php from the file
 * https://github.com/googleapis/googleapis/blob/master/google/pubsub/v1/pubsub.proto
 * Updates to the above are reflected here through a refresh process.
 */

namespace Google\Cloud\PubSub\V1\Gapic;

use Google\ApiCore\ApiException;
use Google\ApiCore\Call;
use Google\ApiCore\CredentialsWrapper;
use Google\ApiCore\GapicClientTrait;
use Google\ApiCore\PathTemplate;
use Google\ApiCore\RequestParamsHeaderDescriptor;
use Google\ApiCore\RetrySettings;
use Google\ApiCore\Transport\TransportInterface;
use Google\ApiCore\ValidationException;
use Google\Auth\FetchAuthTokenInterface;
use Google\Cloud\Iam\V1\GetIamPolicyRequest;
use Google\Cloud\Iam\V1\GetPolicyOptions;
use Google\Cloud\Iam\V1\Policy;
use Google\Cloud\Iam\V1\SetIamPolicyRequest;
use Google\Cloud\Iam\V1\TestIamPermissionsRequest;
use Google\Cloud\Iam\V1\TestIamPermissionsResponse;
use Google\Cloud\PubSub\V1\AcknowledgeRequest;
use Google\Cloud\PubSub\V1\BigQueryConfig;
use Google\Cloud\PubSub\V1\CreateSnapshotRequest;
use Google\Cloud\PubSub\V1\DeadLetterPolicy;
use Google\Cloud\PubSub\V1\DeleteSnapshotRequest;
use Google\Cloud\PubSub\V1\DeleteSubscriptionRequest;
use Google\Cloud\PubSub\V1\ExpirationPolicy;
use Google\Cloud\PubSub\V1\GetSnapshotRequest;
use Google\Cloud\PubSub\V1\GetSubscriptionRequest;
use Google\Cloud\PubSub\V1\ListSnapshotsRequest;
use Google\Cloud\PubSub\V1\ListSnapshotsResponse;
use Google\Cloud\PubSub\V1\ListSubscriptionsRequest;
use Google\Cloud\PubSub\V1\ListSubscriptionsResponse;
use Google\Cloud\PubSub\V1\ModifyAckDeadlineRequest;
use Google\Cloud\PubSub\V1\ModifyPushConfigRequest;
use Google\Cloud\PubSub\V1\PullRequest;
use Google\Cloud\PubSub\V1\PullResponse;
use Google\Cloud\PubSub\V1\PushConfig;
use Google\Cloud\PubSub\V1\RetryPolicy;
use Google\Cloud\PubSub\V1\SeekRequest;
use Google\Cloud\PubSub\V1\SeekResponse;
use Google\Cloud\PubSub\V1\Snapshot;
use Google\Cloud\PubSub\V1\StreamingPullRequest;
use Google\Cloud\PubSub\V1\StreamingPullResponse;
use Google\Cloud\PubSub\V1\Subscription;
use Google\Cloud\PubSub\V1\Subscription\State;
use Google\Cloud\PubSub\V1\UpdateSnapshotRequest;
use Google\Cloud\PubSub\V1\UpdateSubscriptionRequest;
use Google\Protobuf\Duration;
use Google\Protobuf\FieldMask;
use Google\Protobuf\GPBEmpty;
use Google\Protobuf\Timestamp;

/**
 * Service Description: The service that an application uses to manipulate subscriptions and to
 * consume messages from a subscription via the `Pull` method or by
 * establishing a bi-directional stream using the `StreamingPull` method.
 *
 * This class provides the ability to make remote calls to the backing service through method
 * calls that map to API methods. Sample code to get started:
 *
 * ```
 * $subscriberClient = new SubscriberClient();
 * try {
 *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
 *     $ackIds = [];
 *     $subscriberClient->acknowledge($formattedSubscription, $ackIds);
 * } finally {
 *     $subscriberClient->close();
 * }
 * ```
 *
 * Many parameters require resource names to be formatted in a particular way. To
 * assist with these names, this class includes a format method for each type of
 * name, and additionally a parseName method to extract the individual identifiers
 * contained within formatted names that are returned by the API.
 */
class SubscriberGapicClient
{
    use GapicClientTrait;

    /** The name of the service. */
    const SERVICE_NAME = 'google.pubsub.v1.Subscriber';

    /** The default address of the service. */
    const SERVICE_ADDRESS = 'pubsub.googleapis.com';

    /** The default port of the service. */
    const DEFAULT_SERVICE_PORT = 443;

    /** The name of the code generator, to be included in the agent header. */
    const CODEGEN_NAME = 'gapic';

    /** The default scopes required by the service. */
    public static $serviceScopes = [
        'https://www.googleapis.com/auth/cloud-platform',
        'https://www.googleapis.com/auth/pubsub',
    ];

    private static $deletedTopicNameTemplate;

    private static $projectNameTemplate;

    private static $projectTopicNameTemplate;

    private static $snapshotNameTemplate;

    private static $subscriptionNameTemplate;

    private static $topicNameTemplate;

    private static $pathTemplateMap;

    private static function getClientDefaults()
    {
        return [
            'serviceName' => self::SERVICE_NAME,
            'apiEndpoint' => self::SERVICE_ADDRESS . ':' . self::DEFAULT_SERVICE_PORT,
            'clientConfig' => __DIR__ . '/../resources/subscriber_client_config.json',
            'descriptorsConfigPath' => __DIR__ . '/../resources/subscriber_descriptor_config.php',
            'gcpApiConfigPath' => __DIR__ . '/../resources/subscriber_grpc_config.json',
            'credentialsConfig' => [
                'defaultScopes' => self::$serviceScopes,
            ],
            'transportConfig' => [
                'rest' => [
                    'restClientConfigPath' => __DIR__ . '/../resources/subscriber_rest_client_config.php',
                ],
            ],
        ];
    }

    private static function getDeletedTopicNameTemplate()
    {
        if (self::$deletedTopicNameTemplate == null) {
            self::$deletedTopicNameTemplate = new PathTemplate('_deleted-topic_');
        }

        return self::$deletedTopicNameTemplate;
    }

    private static function getProjectNameTemplate()
    {
        if (self::$projectNameTemplate == null) {
            self::$projectNameTemplate = new PathTemplate('projects/{project}');
        }

        return self::$projectNameTemplate;
    }

    private static function getProjectTopicNameTemplate()
    {
        if (self::$projectTopicNameTemplate == null) {
            self::$projectTopicNameTemplate = new PathTemplate('projects/{project}/topics/{topic}');
        }

        return self::$projectTopicNameTemplate;
    }

    private static function getSnapshotNameTemplate()
    {
        if (self::$snapshotNameTemplate == null) {
            self::$snapshotNameTemplate = new PathTemplate('projects/{project}/snapshots/{snapshot}');
        }

        return self::$snapshotNameTemplate;
    }

    private static function getSubscriptionNameTemplate()
    {
        if (self::$subscriptionNameTemplate == null) {
            self::$subscriptionNameTemplate = new PathTemplate('projects/{project}/subscriptions/{subscription}');
        }

        return self::$subscriptionNameTemplate;
    }

    private static function getTopicNameTemplate()
    {
        if (self::$topicNameTemplate == null) {
            self::$topicNameTemplate = new PathTemplate('projects/{project}/topics/{topic}');
        }

        return self::$topicNameTemplate;
    }

    private static function getPathTemplateMap()
    {
        if (self::$pathTemplateMap == null) {
            self::$pathTemplateMap = [
                'deletedTopic' => self::getDeletedTopicNameTemplate(),
                'project' => self::getProjectNameTemplate(),
                'projectTopic' => self::getProjectTopicNameTemplate(),
                'snapshot' => self::getSnapshotNameTemplate(),
                'subscription' => self::getSubscriptionNameTemplate(),
                'topic' => self::getTopicNameTemplate(),
            ];
        }

        return self::$pathTemplateMap;
    }

    /**
     * Formats a string containing the fully-qualified path to represent a
     * _deleted-topic_ resource.
     *
     * @return string The formatted _deleted-topic_ resource.
     */
    public static function deletedTopicName()
    {
        return self::getDeletedTopicNameTemplate()->render([]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a project
     * resource.
     *
     * @param string $project
     *
     * @return string The formatted project resource.
     */
    public static function projectName($project)
    {
        return self::getProjectNameTemplate()->render([
            'project' => $project,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a
     * project_topic resource.
     *
     * @param string $project
     * @param string $topic
     *
     * @return string The formatted project_topic resource.
     */
    public static function projectTopicName($project, $topic)
    {
        return self::getProjectTopicNameTemplate()->render([
            'project' => $project,
            'topic' => $topic,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a snapshot
     * resource.
     *
     * @param string $project
     * @param string $snapshot
     *
     * @return string The formatted snapshot resource.
     */
    public static function snapshotName($project, $snapshot)
    {
        return self::getSnapshotNameTemplate()->render([
            'project' => $project,
            'snapshot' => $snapshot,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a subscription
     * resource.
     *
     * @param string $project
     * @param string $subscription
     *
     * @return string The formatted subscription resource.
     */
    public static function subscriptionName($project, $subscription)
    {
        return self::getSubscriptionNameTemplate()->render([
            'project' => $project,
            'subscription' => $subscription,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a topic
     * resource.
     *
     * @param string $project
     * @param string $topic
     *
     * @return string The formatted topic resource.
     */
    public static function topicName($project, $topic)
    {
        return self::getTopicNameTemplate()->render([
            'project' => $project,
            'topic' => $topic,
        ]);
    }

    /**
     * Parses a formatted name string and returns an associative array of the components in the name.
     * The following name formats are supported:
     * Template: Pattern
     * - deletedTopic: _deleted-topic_
     * - project: projects/{project}
     * - projectTopic: projects/{project}/topics/{topic}
     * - snapshot: projects/{project}/snapshots/{snapshot}
     * - subscription: projects/{project}/subscriptions/{subscription}
     * - topic: projects/{project}/topics/{topic}
     *
     * The optional $template argument can be supplied to specify a particular pattern,
     * and must match one of the templates listed above. If no $template argument is
     * provided, or if the $template argument does not match one of the templates
     * listed, then parseName will check each of the supported templates, and return
     * the first match.
     *
     * @param string $formattedName The formatted name string
     * @param string $template      Optional name of template to match
     *
     * @return array An associative array from name component IDs to component values.
     *
     * @throws ValidationException If $formattedName could not be matched.
     */
    public static function parseName($formattedName, $template = null)
    {
        $templateMap = self::getPathTemplateMap();
        if ($template) {
            if (!isset($templateMap[$template])) {
                throw new ValidationException("Template name $template does not exist");
            }

            return $templateMap[$template]->match($formattedName);
        }

        foreach ($templateMap as $templateName => $pathTemplate) {
            try {
                return $pathTemplate->match($formattedName);
            } catch (ValidationException $ex) {
                // Swallow the exception to continue trying other path templates
            }
        }

        throw new ValidationException("Input did not match any known format. Input: $formattedName");
    }

    /**
     * Constructor.
     *
     * @param array $options {
     *     Optional. Options for configuring the service API wrapper.
     *
     *     @type string $apiEndpoint
     *           The address of the API remote host. May optionally include the port, formatted
     *           as "<uri>:<port>". Default 'pubsub.googleapis.com:443'.
     *     @type string|array|FetchAuthTokenInterface|CredentialsWrapper $credentials
     *           The credentials to be used by the client to authorize API calls. This option
     *           accepts either a path to a credentials file, or a decoded credentials file as a
     *           PHP array.
     *           *Advanced usage*: In addition, this option can also accept a pre-constructed
     *           {@see \Google\Auth\FetchAuthTokenInterface} object or
     *           {@see \Google\ApiCore\CredentialsWrapper} object. Note that when one of these
     *           objects are provided, any settings in $credentialsConfig will be ignored.
     *     @type array $credentialsConfig
     *           Options used to configure credentials, including auth token caching, for the
     *           client. For a full list of supporting configuration options, see
     *           {@see \Google\ApiCore\CredentialsWrapper::build()} .
     *     @type bool $disableRetries
     *           Determines whether or not retries defined by the client configuration should be
     *           disabled. Defaults to `false`.
     *     @type string|array $clientConfig
     *           Client method configuration, including retry settings. This option can be either
     *           a path to a JSON file, or a PHP array containing the decoded JSON data. By
     *           default this settings points to the default client config file, which is
     *           provided in the resources folder.
     *     @type string|TransportInterface $transport
     *           The transport used for executing network requests. May be either the string
     *           `rest` or `grpc`. Defaults to `grpc` if gRPC support is detected on the system.
     *           *Advanced usage*: Additionally, it is possible to pass in an already
     *           instantiated {@see \Google\ApiCore\Transport\TransportInterface} object. Note
     *           that when this object is provided, any settings in $transportConfig, and any
     *           $apiEndpoint setting, will be ignored.
     *     @type array $transportConfig
     *           Configuration options that will be used to construct the transport. Options for
     *           each supported transport type should be passed in a key for that transport. For
     *           example:
     *           $transportConfig = [
     *               'grpc' => [...],
     *               'rest' => [...],
     *           ];
     *           See the {@see \Google\ApiCore\Transport\GrpcTransport::build()} and
     *           {@see \Google\ApiCore\Transport\RestTransport::build()} methods for the
     *           supported options.
     *     @type callable $clientCertSource
     *           A callable which returns the client cert as a string. This can be used to
     *           provide a certificate and private key to the transport layer for mTLS.
     * }
     *
     * @throws ValidationException
     */
    public function __construct(array $options = [])
    {
        $clientOptions = $this->buildClientOptions($options);
        $this->setClientOptions($clientOptions);
    }

    /**
     * Acknowledges the messages associated with the `ack_ids` in the
     * `AcknowledgeRequest`. The Pub/Sub system can remove the relevant messages
     * from the subscription.
     *
     * Acknowledging a message whose ack deadline has expired may succeed,
     * but such a message may be redelivered later. Acknowledging a message more
     * than once will not result in an error.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $ackIds = [];
     *     $subscriberClient->acknowledge($formattedSubscription, $ackIds);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string   $subscription Required. The subscription whose message is being acknowledged.
     *                               Format is `projects/{project}/subscriptions/{sub}`.
     * @param string[] $ackIds       Required. The acknowledgment ID for the messages being acknowledged that
     *                               was returned by the Pub/Sub system in the `Pull` response. Must not be
     *                               empty.
     * @param array    $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function acknowledge($subscription, $ackIds, array $optionalArgs = [])
    {
        $request = new AcknowledgeRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $request->setAckIds($ackIds);
        $requestParamHeaders['subscription'] = $subscription;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('Acknowledge', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Creates a snapshot from the requested subscription. Snapshots are used in
     * [Seek](https://cloud.google.com/pubsub/docs/replay-overview) operations,
     * which allow you to manage message acknowledgments in bulk. That is, you can
     * set the acknowledgment state of messages in an existing subscription to the
     * state captured by a snapshot.
     * If the snapshot already exists, returns `ALREADY_EXISTS`.
     * If the requested subscription doesn't exist, returns `NOT_FOUND`.
     * If the backlog in the subscription is too old -- and the resulting snapshot
     * would expire in less than 1 hour -- then `FAILED_PRECONDITION` is returned.
     * See also the `Snapshot.expire_time` field. If the name is not provided in
     * the request, the server will assign a random
     * name for this snapshot on the same project as the subscription, conforming
     * to the [resource name format]
     * (https://cloud.google.com/pubsub/docs/admin#resource_names). The
     * generated name is populated in the returned Snapshot object. Note that for
     * REST API requests, you must specify a name in the request.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedName = $subscriberClient->snapshotName('[PROJECT]', '[SNAPSHOT]');
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $response = $subscriberClient->createSnapshot($formattedName, $formattedSubscription);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $name         Required. User-provided name for this snapshot. If the name is not provided
     *                             in the request, the server will assign a random name for this snapshot on
     *                             the same project as the subscription. Note that for REST API requests, you
     *                             must specify a name.  See the [resource name
     *                             rules](https://cloud.google.com/pubsub/docs/admin#resource_names). Format
     *                             is `projects/{project}/snapshots/{snap}`.
     * @param string $subscription Required. The subscription whose backlog the snapshot retains.
     *                             Specifically, the created snapshot is guaranteed to retain:
     *                             (a) The existing backlog on the subscription. More precisely, this is
     *                             defined as the messages in the subscription's backlog that are
     *                             unacknowledged upon the successful completion of the
     *                             `CreateSnapshot` request; as well as:
     *                             (b) Any messages published to the subscription's topic following the
     *                             successful completion of the CreateSnapshot request.
     *                             Format is `projects/{project}/subscriptions/{sub}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type array $labels
     *           See [Creating and managing
     *           labels](https://cloud.google.com/pubsub/docs/labels).
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\Snapshot
     *
     * @throws ApiException if the remote call fails
     */
    public function createSnapshot($name, $subscription, array $optionalArgs = [])
    {
        $request = new CreateSnapshotRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setSubscription($subscription);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['labels'])) {
            $request->setLabels($optionalArgs['labels']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CreateSnapshot', Snapshot::class, $optionalArgs, $request)->wait();
    }

    /**
     * Creates a subscription to a given topic. See the [resource name rules]
     * (https://cloud.google.com/pubsub/docs/admin#resource_names).
     * If the subscription already exists, returns `ALREADY_EXISTS`.
     * If the corresponding topic doesn't exist, returns `NOT_FOUND`.
     *
     * If the name is not provided in the request, the server will assign a random
     * name for this subscription on the same project as the topic, conforming
     * to the [resource name format]
     * (https://cloud.google.com/pubsub/docs/admin#resource_names). The generated
     * name is populated in the returned Subscription object. Note that for REST
     * API requests, you must specify a name in the request.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $name = 'name';
     *     $formattedTopic = $subscriberClient->topicName('[PROJECT]', '[TOPIC]');
     *     $response = $subscriberClient->createSubscription($name, $formattedTopic);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The name of the subscription. It must have the format
     *                             `"projects/{project}/subscriptions/{subscription}"`. `{subscription}` must
     *                             start with a letter, and contain only letters (`[A-Za-z]`), numbers
     *                             (`[0-9]`), dashes (`-`), underscores (`_`), periods (`.`), tildes (`~`),
     *                             plus (`+`) or percent signs (`%`). It must be between 3 and 255 characters
     *                             in length, and it must not start with `"goog"`.
     * @param string $topic        Required. The name of the topic from which this subscription is receiving
     *                             messages. Format is `projects/{project}/topics/{topic}`. The value of this
     *                             field will be `_deleted-topic_` if the topic has been deleted.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type PushConfig $pushConfig
     *           If push delivery is used with this subscription, this field is
     *           used to configure it.
     *     @type BigQueryConfig $bigqueryConfig
     *           If delivery to BigQuery is used with this subscription, this field is
     *           used to configure it.
     *     @type int $ackDeadlineSeconds
     *           The approximate amount of time (on a best-effort basis) Pub/Sub waits for
     *           the subscriber to acknowledge receipt before resending the message. In the
     *           interval after the message is delivered and before it is acknowledged, it
     *           is considered to be _outstanding_. During that time period, the
     *           message will not be redelivered (on a best-effort basis).
     *
     *           For pull subscriptions, this value is used as the initial value for the ack
     *           deadline. To override this value for a given message, call
     *           `ModifyAckDeadline` with the corresponding `ack_id` if using
     *           non-streaming pull or send the `ack_id` in a
     *           `StreamingModifyAckDeadlineRequest` if using streaming pull.
     *           The minimum custom deadline you can specify is 10 seconds.
     *           The maximum custom deadline you can specify is 600 seconds (10 minutes).
     *           If this parameter is 0, a default value of 10 seconds is used.
     *
     *           For push delivery, this value is also used to set the request timeout for
     *           the call to the push endpoint.
     *
     *           If the subscriber never acknowledges the message, the Pub/Sub
     *           system will eventually redeliver the message.
     *     @type bool $retainAckedMessages
     *           Indicates whether to retain acknowledged messages. If true, then
     *           messages are not expunged from the subscription's backlog, even if they are
     *           acknowledged, until they fall out of the `message_retention_duration`
     *           window. This must be true if you would like to [`Seek` to a timestamp]
     *           (https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time) in
     *           the past to replay previously-acknowledged messages.
     *     @type Duration $messageRetentionDuration
     *           How long to retain unacknowledged messages in the subscription's backlog,
     *           from the moment a message is published.
     *           If `retain_acked_messages` is true, then this also configures the retention
     *           of acknowledged messages, and thus configures how far back in time a `Seek`
     *           can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10
     *           minutes.
     *     @type array $labels
     *           See [Creating and managing
     *           labels](https://cloud.google.com/pubsub/docs/labels).
     *     @type bool $enableMessageOrdering
     *           If true, messages published with the same `ordering_key` in `PubsubMessage`
     *           will be delivered to the subscribers in the order in which they
     *           are received by the Pub/Sub system. Otherwise, they may be delivered in
     *           any order.
     *     @type ExpirationPolicy $expirationPolicy
     *           A policy that specifies the conditions for this subscription's expiration.
     *           A subscription is considered active as long as any connected subscriber is
     *           successfully consuming messages from the subscription or is issuing
     *           operations on the subscription. If `expiration_policy` is not set, a
     *           *default policy* with `ttl` of 31 days will be used. The minimum allowed
     *           value for `expiration_policy.ttl` is 1 day. If `expiration_policy` is set,
     *           but `expiration_policy.ttl` is not set, the subscription never expires.
     *     @type string $filter
     *           An expression written in the Pub/Sub [filter
     *           language](https://cloud.google.com/pubsub/docs/filtering). If non-empty,
     *           then only `PubsubMessage`s whose `attributes` field matches the filter are
     *           delivered on this subscription. If empty, then no messages are filtered
     *           out.
     *     @type DeadLetterPolicy $deadLetterPolicy
     *           A policy that specifies the conditions for dead lettering messages in
     *           this subscription. If dead_letter_policy is not set, dead lettering
     *           is disabled.
     *
     *           The Cloud Pub/Sub service account associated with this subscriptions's
     *           parent project (i.e.,
     *           service-{project_number}&#64;gcp-sa-pubsub.iam.gserviceaccount.com) must have
     *           permission to Acknowledge() messages on this subscription.
     *     @type RetryPolicy $retryPolicy
     *           A policy that specifies how Pub/Sub retries message delivery for this
     *           subscription.
     *
     *           If not set, the default retry policy is applied. This generally implies
     *           that messages will be retried as soon as possible for healthy subscribers.
     *           RetryPolicy will be triggered on NACKs or acknowledgement deadline
     *           exceeded events for a given message.
     *     @type bool $detached
     *           Indicates whether the subscription is detached from its topic. Detached
     *           subscriptions don't receive messages from their topic and don't retain any
     *           backlog. `Pull` and `StreamingPull` requests will return
     *           FAILED_PRECONDITION. If the subscription is a push subscription, pushes to
     *           the endpoint will not be made.
     *     @type bool $enableExactlyOnceDelivery
     *           If true, Pub/Sub provides the following guarantees for the delivery of
     *           a message with a given value of `message_id` on this subscription:
     *
     *           * The message sent to a subscriber is guaranteed not to be resent
     *           before the message's acknowledgement deadline expires.
     *           * An acknowledged message will not be resent to a subscriber.
     *
     *           Note that subscribers may still receive multiple copies of a message
     *           when `enable_exactly_once_delivery` is true if the message was published
     *           multiple times by a publisher client. These copies are  considered distinct
     *           by Pub/Sub and have distinct `message_id` values.
     *     @type Duration $topicMessageRetentionDuration
     *           Output only. Indicates the minimum duration for which a message is retained
     *           after it is published to the subscription's topic. If this field is set,
     *           messages published to the subscription's topic in the last
     *           `topic_message_retention_duration` are always available to subscribers. See
     *           the `message_retention_duration` field in `Topic`. This field is set only
     *           in responses from the server; it is ignored if it is set in any requests.
     *     @type int $state
     *           Output only. An output-only field indicating whether or not the
     *           subscription can receive messages.
     *           For allowed values, use constants defined on {@see \Google\Cloud\PubSub\V1\Subscription\State}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\Subscription
     *
     * @throws ApiException if the remote call fails
     */
    public function createSubscription($name, $topic, array $optionalArgs = [])
    {
        $request = new Subscription();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setTopic($topic);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['pushConfig'])) {
            $request->setPushConfig($optionalArgs['pushConfig']);
        }

        if (isset($optionalArgs['bigqueryConfig'])) {
            $request->setBigqueryConfig($optionalArgs['bigqueryConfig']);
        }

        if (isset($optionalArgs['ackDeadlineSeconds'])) {
            $request->setAckDeadlineSeconds($optionalArgs['ackDeadlineSeconds']);
        }

        if (isset($optionalArgs['retainAckedMessages'])) {
            $request->setRetainAckedMessages($optionalArgs['retainAckedMessages']);
        }

        if (isset($optionalArgs['messageRetentionDuration'])) {
            $request->setMessageRetentionDuration($optionalArgs['messageRetentionDuration']);
        }

        if (isset($optionalArgs['labels'])) {
            $request->setLabels($optionalArgs['labels']);
        }

        if (isset($optionalArgs['enableMessageOrdering'])) {
            $request->setEnableMessageOrdering($optionalArgs['enableMessageOrdering']);
        }

        if (isset($optionalArgs['expirationPolicy'])) {
            $request->setExpirationPolicy($optionalArgs['expirationPolicy']);
        }

        if (isset($optionalArgs['filter'])) {
            $request->setFilter($optionalArgs['filter']);
        }

        if (isset($optionalArgs['deadLetterPolicy'])) {
            $request->setDeadLetterPolicy($optionalArgs['deadLetterPolicy']);
        }

        if (isset($optionalArgs['retryPolicy'])) {
            $request->setRetryPolicy($optionalArgs['retryPolicy']);
        }

        if (isset($optionalArgs['detached'])) {
            $request->setDetached($optionalArgs['detached']);
        }

        if (isset($optionalArgs['enableExactlyOnceDelivery'])) {
            $request->setEnableExactlyOnceDelivery($optionalArgs['enableExactlyOnceDelivery']);
        }

        if (isset($optionalArgs['topicMessageRetentionDuration'])) {
            $request->setTopicMessageRetentionDuration($optionalArgs['topicMessageRetentionDuration']);
        }

        if (isset($optionalArgs['state'])) {
            $request->setState($optionalArgs['state']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CreateSubscription', Subscription::class, $optionalArgs, $request)->wait();
    }

    /**
     * Removes an existing snapshot. Snapshots are used in [Seek]
     * (https://cloud.google.com/pubsub/docs/replay-overview) operations, which
     * allow you to manage message acknowledgments in bulk. That is, you can set
     * the acknowledgment state of messages in an existing subscription to the
     * state captured by a snapshot.
     * When the snapshot is deleted, all messages retained in the snapshot
     * are immediately dropped. After a snapshot is deleted, a new one may be
     * created with the same name, but the new one has no association with the old
     * snapshot or its subscription, unless the same subscription is specified.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSnapshot = $subscriberClient->snapshotName('[PROJECT]', '[SNAPSHOT]');
     *     $subscriberClient->deleteSnapshot($formattedSnapshot);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $snapshot     Required. The name of the snapshot to delete.
     *                             Format is `projects/{project}/snapshots/{snap}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function deleteSnapshot($snapshot, array $optionalArgs = [])
    {
        $request = new DeleteSnapshotRequest();
        $requestParamHeaders = [];
        $request->setSnapshot($snapshot);
        $requestParamHeaders['snapshot'] = $snapshot;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteSnapshot', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Deletes an existing subscription. All messages retained in the subscription
     * are immediately dropped. Calls to `Pull` after deletion will return
     * `NOT_FOUND`. After a subscription is deleted, a new one may be created with
     * the same name, but the new one has no association with the old
     * subscription or its topic unless the same topic is specified.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $subscriberClient->deleteSubscription($formattedSubscription);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $subscription Required. The subscription to delete.
     *                             Format is `projects/{project}/subscriptions/{sub}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function deleteSubscription($subscription, array $optionalArgs = [])
    {
        $request = new DeleteSubscriptionRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $requestParamHeaders['subscription'] = $subscription;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteSubscription', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets the configuration details of a snapshot. Snapshots are used in
     * [Seek](https://cloud.google.com/pubsub/docs/replay-overview) operations,
     * which allow you to manage message acknowledgments in bulk. That is, you can
     * set the acknowledgment state of messages in an existing subscription to the
     * state captured by a snapshot.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSnapshot = $subscriberClient->snapshotName('[PROJECT]', '[SNAPSHOT]');
     *     $response = $subscriberClient->getSnapshot($formattedSnapshot);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $snapshot     Required. The name of the snapshot to get.
     *                             Format is `projects/{project}/snapshots/{snap}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\Snapshot
     *
     * @throws ApiException if the remote call fails
     */
    public function getSnapshot($snapshot, array $optionalArgs = [])
    {
        $request = new GetSnapshotRequest();
        $requestParamHeaders = [];
        $request->setSnapshot($snapshot);
        $requestParamHeaders['snapshot'] = $snapshot;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetSnapshot', Snapshot::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets the configuration details of a subscription.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $response = $subscriberClient->getSubscription($formattedSubscription);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $subscription Required. The name of the subscription to get.
     *                             Format is `projects/{project}/subscriptions/{sub}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\Subscription
     *
     * @throws ApiException if the remote call fails
     */
    public function getSubscription($subscription, array $optionalArgs = [])
    {
        $request = new GetSubscriptionRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $requestParamHeaders['subscription'] = $subscription;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetSubscription', Subscription::class, $optionalArgs, $request)->wait();
    }

    /**
     * Lists the existing snapshots. Snapshots are used in [Seek](
     * https://cloud.google.com/pubsub/docs/replay-overview) operations, which
     * allow you to manage message acknowledgments in bulk. That is, you can set
     * the acknowledgment state of messages in an existing subscription to the
     * state captured by a snapshot.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedProject = $subscriberClient->projectName('[PROJECT]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $subscriberClient->listSnapshots($formattedProject);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $subscriberClient->listSnapshots($formattedProject);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $project      Required. The name of the project in which to list snapshots.
     *                             Format is `projects/{project-id}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function listSnapshots($project, array $optionalArgs = [])
    {
        $request = new ListSnapshotsRequest();
        $requestParamHeaders = [];
        $request->setProject($project);
        $requestParamHeaders['project'] = $project;
        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListSnapshots', $optionalArgs, ListSnapshotsResponse::class, $request);
    }

    /**
     * Lists matching subscriptions.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedProject = $subscriberClient->projectName('[PROJECT]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $subscriberClient->listSubscriptions($formattedProject);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $subscriberClient->listSubscriptions($formattedProject);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $project      Required. The name of the project in which to list subscriptions.
     *                             Format is `projects/{project-id}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function listSubscriptions($project, array $optionalArgs = [])
    {
        $request = new ListSubscriptionsRequest();
        $requestParamHeaders = [];
        $request->setProject($project);
        $requestParamHeaders['project'] = $project;
        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListSubscriptions', $optionalArgs, ListSubscriptionsResponse::class, $request);
    }

    /**
     * Modifies the ack deadline for a specific message. This method is useful
     * to indicate that more time is needed to process a message by the
     * subscriber, or to make the message available for redelivery if the
     * processing was interrupted. Note that this does not modify the
     * subscription-level `ackDeadlineSeconds` used for subsequent messages.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $ackIds = [];
     *     $ackDeadlineSeconds = 0;
     *     $subscriberClient->modifyAckDeadline($formattedSubscription, $ackIds, $ackDeadlineSeconds);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string   $subscription       Required. The name of the subscription.
     *                                     Format is `projects/{project}/subscriptions/{sub}`.
     * @param string[] $ackIds             Required. List of acknowledgment IDs.
     * @param int      $ackDeadlineSeconds Required. The new ack deadline with respect to the time this request was
     *                                     sent to the Pub/Sub system. For example, if the value is 10, the new ack
     *                                     deadline will expire 10 seconds after the `ModifyAckDeadline` call was
     *                                     made. Specifying zero might immediately make the message available for
     *                                     delivery to another subscriber client. This typically results in an
     *                                     increase in the rate of message redeliveries (that is, duplicates).
     *                                     The minimum deadline you can specify is 0 seconds.
     *                                     The maximum deadline you can specify is 600 seconds (10 minutes).
     * @param array    $optionalArgs       {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function modifyAckDeadline($subscription, $ackIds, $ackDeadlineSeconds, array $optionalArgs = [])
    {
        $request = new ModifyAckDeadlineRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $request->setAckIds($ackIds);
        $request->setAckDeadlineSeconds($ackDeadlineSeconds);
        $requestParamHeaders['subscription'] = $subscription;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('ModifyAckDeadline', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Modifies the `PushConfig` for a specified subscription.
     *
     * This may be used to change a push subscription to a pull one (signified by
     * an empty `PushConfig`) or vice versa, or change the endpoint URL and other
     * attributes of a push subscription. Messages will accumulate for delivery
     * continuously through the call regardless of changes to the `PushConfig`.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $pushConfig = new PushConfig();
     *     $subscriberClient->modifyPushConfig($formattedSubscription, $pushConfig);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string     $subscription Required. The name of the subscription.
     *                                 Format is `projects/{project}/subscriptions/{sub}`.
     * @param PushConfig $pushConfig   Required. The push configuration for future deliveries.
     *
     *                                 An empty `pushConfig` indicates that the Pub/Sub system should
     *                                 stop pushing messages from the given subscription and allow
     *                                 messages to be pulled and acknowledged - effectively pausing
     *                                 the subscription if `Pull` or `StreamingPull` is not called.
     * @param array      $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function modifyPushConfig($subscription, $pushConfig, array $optionalArgs = [])
    {
        $request = new ModifyPushConfigRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $request->setPushConfig($pushConfig);
        $requestParamHeaders['subscription'] = $subscription;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('ModifyPushConfig', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Pulls messages from the server.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $maxMessages = 0;
     *     $response = $subscriberClient->pull($formattedSubscription, $maxMessages);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $subscription Required. The subscription from which messages should be pulled.
     *                             Format is `projects/{project}/subscriptions/{sub}`.
     * @param int    $maxMessages  Required. The maximum number of messages to return for this request. Must
     *                             be a positive integer. The Pub/Sub system may return fewer than the number
     *                             specified.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type bool $returnImmediately
     *           Optional. If this field set to true, the system will respond immediately
     *           even if it there are no messages available to return in the `Pull`
     *           response. Otherwise, the system may wait (for a bounded amount of time)
     *           until at least one message is available, rather than returning no messages.
     *           Warning: setting this field to `true` is discouraged because it adversely
     *           impacts the performance of `Pull` operations. We recommend that users do
     *           not set this field.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\PullResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function pull($subscription, $maxMessages, array $optionalArgs = [])
    {
        $request = new PullRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $request->setMaxMessages($maxMessages);
        $requestParamHeaders['subscription'] = $subscription;
        if (isset($optionalArgs['returnImmediately'])) {
            $request->setReturnImmediately($optionalArgs['returnImmediately']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('Pull', PullResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Seeks an existing subscription to a point in time or to a given snapshot,
     * whichever is provided in the request. Snapshots are used in [Seek]
     * (https://cloud.google.com/pubsub/docs/replay-overview) operations, which
     * allow you to manage message acknowledgments in bulk. That is, you can set
     * the acknowledgment state of messages in an existing subscription to the
     * state captured by a snapshot. Note that both the subscription and the
     * snapshot must be on the same topic.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $formattedSubscription = $subscriberClient->subscriptionName('[PROJECT]', '[SUBSCRIPTION]');
     *     $response = $subscriberClient->seek($formattedSubscription);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $subscription Required. The subscription to affect.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type Timestamp $time
     *           The time to seek to.
     *           Messages retained in the subscription that were published before this
     *           time are marked as acknowledged, and messages retained in the
     *           subscription that were published after this time are marked as
     *           unacknowledged. Note that this operation affects only those messages
     *           retained in the subscription (configured by the combination of
     *           `message_retention_duration` and `retain_acked_messages`). For example,
     *           if `time` corresponds to a point before the message retention
     *           window (or to a point before the system's notion of the subscription
     *           creation time), only retained messages will be marked as unacknowledged,
     *           and already-expunged messages will not be restored.
     *     @type string $snapshot
     *           The snapshot to seek to. The snapshot's topic must be the same as that of
     *           the provided subscription.
     *           Format is `projects/{project}/snapshots/{snap}`.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\SeekResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function seek($subscription, array $optionalArgs = [])
    {
        $request = new SeekRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $requestParamHeaders['subscription'] = $subscription;
        if (isset($optionalArgs['time'])) {
            $request->setTime($optionalArgs['time']);
        }

        if (isset($optionalArgs['snapshot'])) {
            $request->setSnapshot($optionalArgs['snapshot']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('Seek', SeekResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Establishes a stream with the server, which sends messages down to the
     * client. The client streams acknowledgements and ack deadline modifications
     * back to the server. The server will close the stream and return the status
     * on any error. The server may close the stream with status `UNAVAILABLE` to
     * reassign server-side resources, in which case, the client should
     * re-establish the stream. Flow control can be achieved by configuring the
     * underlying RPC channel.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $subscription = 'subscription';
     *     $streamAckDeadlineSeconds = 0;
     *     $request = new StreamingPullRequest();
     *     $request->setSubscription($subscription);
     *     $request->setStreamAckDeadlineSeconds($streamAckDeadlineSeconds);
     *     // Write all requests to the server, then read all responses until the
     *     // stream is complete
     *     $requests = [
     *         $request,
     *     ];
     *     $stream = $subscriberClient->streamingPull();
     *     $stream->writeAll($requests);
     *     foreach ($stream->closeWriteAndReadAll() as $element) {
     *         // doSomethingWith($element);
     *     }
     *     // Alternatively:
     *     // Write requests individually, making read() calls if
     *     // required. Call closeWrite() once writes are complete, and read the
     *     // remaining responses from the server.
     *     $requests = [
     *         $request,
     *     ];
     *     $stream = $subscriberClient->streamingPull();
     *     foreach ($requests as $request) {
     *         $stream->write($request);
     *         // if required, read a single response from the stream
     *         $element = $stream->read();
     *         // doSomethingWith($element)
     *     }
     *     $stream->closeWrite();
     *     $element = $stream->read();
     *     while (!is_null($element)) {
     *         // doSomethingWith($element)
     *         $element = $stream->read();
     *     }
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param array $optionalArgs {
     *     Optional.
     *
     *     @type int $timeoutMillis
     *           Timeout to use for this call.
     * }
     *
     * @return \Google\ApiCore\BidiStream
     *
     * @throws ApiException if the remote call fails
     */
    public function streamingPull(array $optionalArgs = [])
    {
        return $this->startCall('StreamingPull', StreamingPullResponse::class, $optionalArgs, null, Call::BIDI_STREAMING_CALL);
    }

    /**
     * Updates an existing snapshot. Snapshots are used in
     * [Seek](https://cloud.google.com/pubsub/docs/replay-overview) operations,
     * which allow you to manage message acknowledgments in bulk. That is, you can
     * set the acknowledgment state of messages in an existing subscription to the
     * state captured by a snapshot.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $snapshot = new Snapshot();
     *     $updateMask = new FieldMask();
     *     $response = $subscriberClient->updateSnapshot($snapshot, $updateMask);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param Snapshot  $snapshot     Required. The updated snapshot object.
     * @param FieldMask $updateMask   Required. Indicates which fields in the provided snapshot to update.
     *                                Must be specified and non-empty.
     * @param array     $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\Snapshot
     *
     * @throws ApiException if the remote call fails
     */
    public function updateSnapshot($snapshot, $updateMask, array $optionalArgs = [])
    {
        $request = new UpdateSnapshotRequest();
        $requestParamHeaders = [];
        $request->setSnapshot($snapshot);
        $request->setUpdateMask($updateMask);
        $requestParamHeaders['snapshot.name'] = $snapshot->getName();
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('UpdateSnapshot', Snapshot::class, $optionalArgs, $request)->wait();
    }

    /**
     * Updates an existing subscription. Note that certain properties of a
     * subscription, such as its topic, are not modifiable.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $subscription = new Subscription();
     *     $updateMask = new FieldMask();
     *     $response = $subscriberClient->updateSubscription($subscription, $updateMask);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param Subscription $subscription Required. The updated subscription object.
     * @param FieldMask    $updateMask   Required. Indicates which fields in the provided subscription to update.
     *                                   Must be specified and non-empty.
     * @param array        $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\PubSub\V1\Subscription
     *
     * @throws ApiException if the remote call fails
     */
    public function updateSubscription($subscription, $updateMask, array $optionalArgs = [])
    {
        $request = new UpdateSubscriptionRequest();
        $requestParamHeaders = [];
        $request->setSubscription($subscription);
        $request->setUpdateMask($updateMask);
        $requestParamHeaders['subscription.name'] = $subscription->getName();
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('UpdateSubscription', Subscription::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets the access control policy for a resource. Returns an empty policy
    if the resource exists and does not have a policy set.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $resource = 'resource';
     *     $response = $subscriberClient->getIamPolicy($resource);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $resource     REQUIRED: The resource for which the policy is being requested.
     *                             See the operation documentation for the appropriate value for this field.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type GetPolicyOptions $options
     *           OPTIONAL: A `GetPolicyOptions` object for specifying options to
     *           `GetIamPolicy`.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\Policy
     *
     * @throws ApiException if the remote call fails
     */
    public function getIamPolicy($resource, array $optionalArgs = [])
    {
        $request = new GetIamPolicyRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $requestParamHeaders['resource'] = $resource;
        if (isset($optionalArgs['options'])) {
            $request->setOptions($optionalArgs['options']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetIamPolicy', Policy::class, $optionalArgs, $request, Call::UNARY_CALL, 'google.iam.v1.IAMPolicy')->wait();
    }

    /**
     * Sets the access control policy on the specified resource. Replaces
    any existing policy.

    Can return `NOT_FOUND`, `INVALID_ARGUMENT`, and `PERMISSION_DENIED`
    errors.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $resource = 'resource';
     *     $policy = new Policy();
     *     $response = $subscriberClient->setIamPolicy($resource, $policy);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string $resource     REQUIRED: The resource for which the policy is being specified.
     *                             See the operation documentation for the appropriate value for this field.
     * @param Policy $policy       REQUIRED: The complete policy to be applied to the `resource`. The size of
     *                             the policy is limited to a few 10s of KB. An empty policy is a
     *                             valid policy but certain Cloud Platform services (such as Projects)
     *                             might reject them.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type FieldMask $updateMask
     *           OPTIONAL: A FieldMask specifying which fields of the policy to modify. Only
     *           the fields in the mask will be modified. If no mask is provided, the
     *           following default mask is used:
     *
     *           `paths: "bindings, etag"`
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\Policy
     *
     * @throws ApiException if the remote call fails
     */
    public function setIamPolicy($resource, $policy, array $optionalArgs = [])
    {
        $request = new SetIamPolicyRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $request->setPolicy($policy);
        $requestParamHeaders['resource'] = $resource;
        if (isset($optionalArgs['updateMask'])) {
            $request->setUpdateMask($optionalArgs['updateMask']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('SetIamPolicy', Policy::class, $optionalArgs, $request, Call::UNARY_CALL, 'google.iam.v1.IAMPolicy')->wait();
    }

    /**
     * Returns permissions that a caller has on the specified resource. If the
    resource does not exist, this will return an empty set of
    permissions, not a `NOT_FOUND` error.

    Note: This operation is designed to be used for building
    permission-aware UIs and command-line tools, not for authorization
    checking. This operation may "fail open" without warning.
     *
     * Sample code:
     * ```
     * $subscriberClient = new SubscriberClient();
     * try {
     *     $resource = 'resource';
     *     $permissions = [];
     *     $response = $subscriberClient->testIamPermissions($resource, $permissions);
     * } finally {
     *     $subscriberClient->close();
     * }
     * ```
     *
     * @param string   $resource     REQUIRED: The resource for which the policy detail is being requested.
     *                               See the operation documentation for the appropriate value for this field.
     * @param string[] $permissions  The set of permissions to check for the `resource`. Permissions with
     *                               wildcards (such as '*' or 'storage.*') are not allowed. For more
     *                               information see
     *                               [IAM Overview](https://cloud.google.com/iam/docs/overview#permissions).
     * @param array    $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\TestIamPermissionsResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function testIamPermissions($resource, $permissions, array $optionalArgs = [])
    {
        $request = new TestIamPermissionsRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $request->setPermissions($permissions);
        $requestParamHeaders['resource'] = $resource;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('TestIamPermissions', TestIamPermissionsResponse::class, $optionalArgs, $request, Call::UNARY_CALL, 'google.iam.v1.IAMPolicy')->wait();
    }
}