<?php
/*
 * Copyright 2018 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * GENERATED CODE WARNING
 * Generated by gapic-generator-php from the file
 * https://github.com/googleapis/googleapis/blob/master/google/devtools/clouddebugger/v2/controller.proto
 * Updates to the above are reflected here through a refresh process.
 */

namespace Google\Cloud\Debugger\V2\Gapic;

use Google\ApiCore\ApiException;
use Google\ApiCore\CredentialsWrapper;
use Google\ApiCore\GapicClientTrait;
use Google\ApiCore\RequestParamsHeaderDescriptor;
use Google\ApiCore\RetrySettings;
use Google\ApiCore\Transport\TransportInterface;
use Google\ApiCore\ValidationException;
use Google\Auth\FetchAuthTokenInterface;
use Google\Cloud\Debugger\V2\Breakpoint;
use Google\Cloud\Debugger\V2\Debuggee;
use Google\Cloud\Debugger\V2\ListActiveBreakpointsRequest;
use Google\Cloud\Debugger\V2\ListActiveBreakpointsResponse;
use Google\Cloud\Debugger\V2\RegisterDebuggeeRequest;
use Google\Cloud\Debugger\V2\RegisterDebuggeeResponse;
use Google\Cloud\Debugger\V2\UpdateActiveBreakpointRequest;
use Google\Cloud\Debugger\V2\UpdateActiveBreakpointResponse;

/**
 * Service Description: The Controller service provides the API for orchestrating a collection of
 * debugger agents to perform debugging tasks. These agents are each attached
 * to a process of an application which may include one or more replicas.
 *
 * The debugger agents register with the Controller to identify the application
 * being debugged, the Debuggee. All agents that register with the same data,
 * represent the same Debuggee, and are assigned the same `debuggee_id`.
 *
 * The debugger agents call the Controller to retrieve  the list of active
 * Breakpoints. Agents with the same `debuggee_id` get the same breakpoints
 * list. An agent that can fulfill the breakpoint request updates the
 * Controller with the breakpoint result. The controller selects the first
 * result received and discards the rest of the results.
 * Agents that poll again for active breakpoints will no longer have
 * the completed breakpoint in the list and should remove that breakpoint from
 * their attached process.
 *
 * The Controller service does not provide a way to retrieve the results of
 * a completed breakpoint. This functionality is available using the Debugger
 * service.
 *
 * This class provides the ability to make remote calls to the backing service through method
 * calls that map to API methods. Sample code to get started:
 *
 * ```
 * $controller2Client = new Controller2Client();
 * try {
 *     $debuggeeId = 'debuggee_id';
 *     $response = $controller2Client->listActiveBreakpoints($debuggeeId);
 * } finally {
 *     $controller2Client->close();
 * }
 * ```
 */
class Controller2GapicClient
{
    use GapicClientTrait;

    /** The name of the service. */
    const SERVICE_NAME = 'google.devtools.clouddebugger.v2.Controller2';

    /** The default address of the service. */
    const SERVICE_ADDRESS = 'clouddebugger.googleapis.com';

    /** The default port of the service. */
    const DEFAULT_SERVICE_PORT = 443;

    /** The name of the code generator, to be included in the agent header. */
    const CODEGEN_NAME = 'gapic';

    /** The default scopes required by the service. */
    public static $serviceScopes = [
        'https://www.googleapis.com/auth/cloud-platform',
        'https://www.googleapis.com/auth/cloud_debugger',
    ];

    private static function getClientDefaults()
    {
        return [
            'serviceName' => self::SERVICE_NAME,
            'apiEndpoint' =>
                self::SERVICE_ADDRESS . ':' . self::DEFAULT_SERVICE_PORT,
            'clientConfig' =>
                __DIR__ . '/../resources/controller2_client_config.json',
            'descriptorsConfigPath' =>
                __DIR__ . '/../resources/controller2_descriptor_config.php',
            'gcpApiConfigPath' =>
                __DIR__ . '/../resources/controller2_grpc_config.json',
            'credentialsConfig' => [
                'defaultScopes' => self::$serviceScopes,
            ],
            'transportConfig' => [
                'rest' => [
                    'restClientConfigPath' =>
                        __DIR__ .
                        '/../resources/controller2_rest_client_config.php',
                ],
            ],
        ];
    }

    /**
     * Constructor.
     *
     * @param array $options {
     *     Optional. Options for configuring the service API wrapper.
     *
     *     @type string $apiEndpoint
     *           The address of the API remote host. May optionally include the port, formatted
     *           as "<uri>:<port>". Default 'clouddebugger.googleapis.com:443'.
     *     @type string|array|FetchAuthTokenInterface|CredentialsWrapper $credentials
     *           The credentials to be used by the client to authorize API calls. This option
     *           accepts either a path to a credentials file, or a decoded credentials file as a
     *           PHP array.
     *           *Advanced usage*: In addition, this option can also accept a pre-constructed
     *           {@see \Google\Auth\FetchAuthTokenInterface} object or
     *           {@see \Google\ApiCore\CredentialsWrapper} object. Note that when one of these
     *           objects are provided, any settings in $credentialsConfig will be ignored.
     *     @type array $credentialsConfig
     *           Options used to configure credentials, including auth token caching, for the
     *           client. For a full list of supporting configuration options, see
     *           {@see \Google\ApiCore\CredentialsWrapper::build()} .
     *     @type bool $disableRetries
     *           Determines whether or not retries defined by the client configuration should be
     *           disabled. Defaults to `false`.
     *     @type string|array $clientConfig
     *           Client method configuration, including retry settings. This option can be either
     *           a path to a JSON file, or a PHP array containing the decoded JSON data. By
     *           default this settings points to the default client config file, which is
     *           provided in the resources folder.
     *     @type string|TransportInterface $transport
     *           The transport used for executing network requests. May be either the string
     *           `rest` or `grpc`. Defaults to `grpc` if gRPC support is detected on the system.
     *           *Advanced usage*: Additionally, it is possible to pass in an already
     *           instantiated {@see \Google\ApiCore\Transport\TransportInterface} object. Note
     *           that when this object is provided, any settings in $transportConfig, and any
     *           $apiEndpoint setting, will be ignored.
     *     @type array $transportConfig
     *           Configuration options that will be used to construct the transport. Options for
     *           each supported transport type should be passed in a key for that transport. For
     *           example:
     *           $transportConfig = [
     *               'grpc' => [...],
     *               'rest' => [...],
     *           ];
     *           See the {@see \Google\ApiCore\Transport\GrpcTransport::build()} and
     *           {@see \Google\ApiCore\Transport\RestTransport::build()} methods for the
     *           supported options.
     *     @type callable $clientCertSource
     *           A callable which returns the client cert as a string. This can be used to
     *           provide a certificate and private key to the transport layer for mTLS.
     * }
     *
     * @throws ValidationException
     */
    public function __construct(array $options = [])
    {
        $clientOptions = $this->buildClientOptions($options);
        $this->setClientOptions($clientOptions);
    }

    /**
     * Returns the list of all active breakpoints for the debuggee.
     *
     * The breakpoint specification (`location`, `condition`, and `expressions`
     * fields) is semantically immutable, although the field values may
     * change. For example, an agent may update the location line number
     * to reflect the actual line where the breakpoint was set, but this
     * doesn't change the breakpoint semantics.
     *
     * This means that an agent does not need to check if a breakpoint has changed
     * when it encounters the same breakpoint on a successive call.
     * Moreover, an agent should remember the breakpoints that are completed
     * until the controller removes them from the active list to avoid
     * setting those breakpoints again.
     *
     * Sample code:
     * ```
     * $controller2Client = new Controller2Client();
     * try {
     *     $debuggeeId = 'debuggee_id';
     *     $response = $controller2Client->listActiveBreakpoints($debuggeeId);
     * } finally {
     *     $controller2Client->close();
     * }
     * ```
     *
     * @param string $debuggeeId   Required. Identifies the debuggee.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type string $waitToken
     *           A token that, if specified, blocks the method call until the list
     *           of active breakpoints has changed, or a server-selected timeout has
     *           expired. The value should be set from the `next_wait_token` field in
     *           the last response. The initial value should be set to `"init"`.
     *     @type bool $successOnTimeout
     *           If set to `true` (recommended), returns `google.rpc.Code.OK` status and
     *           sets the `wait_expired` response field to `true` when the server-selected
     *           timeout has expired.
     *
     *           If set to `false` (deprecated), returns `google.rpc.Code.ABORTED` status
     *           when the server-selected timeout has expired.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Debugger\V2\ListActiveBreakpointsResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function listActiveBreakpoints($debuggeeId, array $optionalArgs = [])
    {
        $request = new ListActiveBreakpointsRequest();
        $requestParamHeaders = [];
        $request->setDebuggeeId($debuggeeId);
        $requestParamHeaders['debuggee_id'] = $debuggeeId;
        if (isset($optionalArgs['waitToken'])) {
            $request->setWaitToken($optionalArgs['waitToken']);
        }

        if (isset($optionalArgs['successOnTimeout'])) {
            $request->setSuccessOnTimeout($optionalArgs['successOnTimeout']);
        }

        $requestParams = new RequestParamsHeaderDescriptor(
            $requestParamHeaders
        );
        $optionalArgs['headers'] = isset($optionalArgs['headers'])
            ? array_merge($requestParams->getHeader(), $optionalArgs['headers'])
            : $requestParams->getHeader();
        return $this->startCall(
            'ListActiveBreakpoints',
            ListActiveBreakpointsResponse::class,
            $optionalArgs,
            $request
        )->wait();
    }

    /**
     * Registers the debuggee with the controller service.
     *
     * All agents attached to the same application must call this method with
     * exactly the same request content to get back the same stable `debuggee_id`.
     * Agents should call this method again whenever `google.rpc.Code.NOT_FOUND`
     * is returned from any controller method.
     *
     * This protocol allows the controller service to disable debuggees, recover
     * from data loss, or change the `debuggee_id` format. Agents must handle
     * `debuggee_id` value changing upon re-registration.
     *
     * Sample code:
     * ```
     * $controller2Client = new Controller2Client();
     * try {
     *     $debuggee = new Debuggee();
     *     $response = $controller2Client->registerDebuggee($debuggee);
     * } finally {
     *     $controller2Client->close();
     * }
     * ```
     *
     * @param Debuggee $debuggee     Required. Debuggee information to register.
     *                               The fields `project`, `uniquifier`, `description` and `agent_version`
     *                               of the debuggee must be set.
     * @param array    $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Debugger\V2\RegisterDebuggeeResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function registerDebuggee($debuggee, array $optionalArgs = [])
    {
        $request = new RegisterDebuggeeRequest();
        $request->setDebuggee($debuggee);
        return $this->startCall(
            'RegisterDebuggee',
            RegisterDebuggeeResponse::class,
            $optionalArgs,
            $request
        )->wait();
    }

    /**
     * Updates the breakpoint state or mutable fields.
     * The entire Breakpoint message must be sent back to the controller service.
     *
     * Updates to active breakpoint fields are only allowed if the new value
     * does not change the breakpoint specification. Updates to the `location`,
     * `condition` and `expressions` fields should not alter the breakpoint
     * semantics. These may only make changes such as canonicalizing a value
     * or snapping the location to the correct line of code.
     *
     * Sample code:
     * ```
     * $controller2Client = new Controller2Client();
     * try {
     *     $debuggeeId = 'debuggee_id';
     *     $breakpoint = new Breakpoint();
     *     $response = $controller2Client->updateActiveBreakpoint($debuggeeId, $breakpoint);
     * } finally {
     *     $controller2Client->close();
     * }
     * ```
     *
     * @param string     $debuggeeId   Required. Identifies the debuggee being debugged.
     * @param Breakpoint $breakpoint   Required. Updated breakpoint information.
     *                                 The field `id` must be set.
     *                                 The agent must echo all Breakpoint specification fields in the update.
     * @param array      $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Debugger\V2\UpdateActiveBreakpointResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function updateActiveBreakpoint(
        $debuggeeId,
        $breakpoint,
        array $optionalArgs = []
    ) {
        $request = new UpdateActiveBreakpointRequest();
        $requestParamHeaders = [];
        $request->setDebuggeeId($debuggeeId);
        $request->setBreakpoint($breakpoint);
        $requestParamHeaders['debuggee_id'] = $debuggeeId;
        $requestParamHeaders['breakpoint.id'] = $breakpoint->getId();
        $requestParams = new RequestParamsHeaderDescriptor(
            $requestParamHeaders
        );
        $optionalArgs['headers'] = isset($optionalArgs['headers'])
            ? array_merge($requestParams->getHeader(), $optionalArgs['headers'])
            : $requestParams->getHeader();
        return $this->startCall(
            'UpdateActiveBreakpoint',
            UpdateActiveBreakpointResponse::class,
            $optionalArgs,
            $request
        )->wait();
    }
}