<?php
/*
 * Copyright 2017 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * GENERATED CODE WARNING
 * Generated by gapic-generator-php from the file
 * https://github.com/googleapis/googleapis/blob/master/google/bigtable/admin/v2/bigtable_table_admin.proto
 * Updates to the above are reflected here through a refresh process.
 */

namespace Google\Cloud\Bigtable\Admin\V2\Gapic;

use Google\ApiCore\ApiException;
use Google\ApiCore\CredentialsWrapper;
use Google\ApiCore\GapicClientTrait;
use Google\ApiCore\LongRunning\OperationsClient;
use Google\ApiCore\OperationResponse;
use Google\ApiCore\PathTemplate;
use Google\ApiCore\RequestParamsHeaderDescriptor;
use Google\ApiCore\RetrySettings;
use Google\ApiCore\Transport\TransportInterface;
use Google\ApiCore\ValidationException;
use Google\Auth\FetchAuthTokenInterface;
use Google\Cloud\Bigtable\Admin\V2\Backup;
use Google\Cloud\Bigtable\Admin\V2\CheckConsistencyRequest;
use Google\Cloud\Bigtable\Admin\V2\CheckConsistencyResponse;
use Google\Cloud\Bigtable\Admin\V2\CreateBackupMetadata;
use Google\Cloud\Bigtable\Admin\V2\CreateBackupRequest;
use Google\Cloud\Bigtable\Admin\V2\CreateTableFromSnapshotRequest;
use Google\Cloud\Bigtable\Admin\V2\CreateTableRequest;
use Google\Cloud\Bigtable\Admin\V2\CreateTableRequest\Split;
use Google\Cloud\Bigtable\Admin\V2\DeleteBackupRequest;
use Google\Cloud\Bigtable\Admin\V2\DeleteSnapshotRequest;
use Google\Cloud\Bigtable\Admin\V2\DeleteTableRequest;
use Google\Cloud\Bigtable\Admin\V2\DropRowRangeRequest;
use Google\Cloud\Bigtable\Admin\V2\GenerateConsistencyTokenRequest;
use Google\Cloud\Bigtable\Admin\V2\GenerateConsistencyTokenResponse;
use Google\Cloud\Bigtable\Admin\V2\GetBackupRequest;
use Google\Cloud\Bigtable\Admin\V2\GetSnapshotRequest;
use Google\Cloud\Bigtable\Admin\V2\GetTableRequest;
use Google\Cloud\Bigtable\Admin\V2\ListBackupsRequest;
use Google\Cloud\Bigtable\Admin\V2\ListBackupsResponse;
use Google\Cloud\Bigtable\Admin\V2\ListSnapshotsRequest;
use Google\Cloud\Bigtable\Admin\V2\ListSnapshotsResponse;
use Google\Cloud\Bigtable\Admin\V2\ListTablesRequest;
use Google\Cloud\Bigtable\Admin\V2\ListTablesResponse;
use Google\Cloud\Bigtable\Admin\V2\ModifyColumnFamiliesRequest;
use Google\Cloud\Bigtable\Admin\V2\ModifyColumnFamiliesRequest\Modification;
use Google\Cloud\Bigtable\Admin\V2\RestoreTableMetadata;
use Google\Cloud\Bigtable\Admin\V2\RestoreTableRequest;
use Google\Cloud\Bigtable\Admin\V2\Snapshot;
use Google\Cloud\Bigtable\Admin\V2\SnapshotTableRequest;
use Google\Cloud\Bigtable\Admin\V2\Table;
use Google\Cloud\Bigtable\Admin\V2\Table\View;
use Google\Cloud\Bigtable\Admin\V2\UndeleteTableRequest;
use Google\Cloud\Bigtable\Admin\V2\UpdateBackupRequest;
use Google\Cloud\Bigtable\Admin\V2\UpdateTableRequest;
use Google\Cloud\Iam\V1\GetIamPolicyRequest;
use Google\Cloud\Iam\V1\GetPolicyOptions;
use Google\Cloud\Iam\V1\Policy;
use Google\Cloud\Iam\V1\SetIamPolicyRequest;
use Google\Cloud\Iam\V1\TestIamPermissionsRequest;
use Google\Cloud\Iam\V1\TestIamPermissionsResponse;
use Google\LongRunning\Operation;
use Google\Protobuf\Duration;
use Google\Protobuf\FieldMask;
use Google\Protobuf\GPBEmpty;

/**
 * Service Description: Service for creating, configuring, and deleting Cloud Bigtable tables.
 *
 *
 * Provides access to the table schemas only, not the data stored within
 * the tables.
 *
 * This class provides the ability to make remote calls to the backing service through method
 * calls that map to API methods. Sample code to get started:
 *
 * ```
 * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
 * try {
 *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
 *     $consistencyToken = 'consistency_token';
 *     $response = $bigtableTableAdminClient->checkConsistency($formattedName, $consistencyToken);
 * } finally {
 *     $bigtableTableAdminClient->close();
 * }
 * ```
 *
 * Many parameters require resource names to be formatted in a particular way. To
 * assist with these names, this class includes a format method for each type of
 * name, and additionally a parseName method to extract the individual identifiers
 * contained within formatted names that are returned by the API.
 */
class BigtableTableAdminGapicClient
{
    use GapicClientTrait;

    /** The name of the service. */
    const SERVICE_NAME = 'google.bigtable.admin.v2.BigtableTableAdmin';

    /** The default address of the service. */
    const SERVICE_ADDRESS = 'bigtableadmin.googleapis.com';

    /** The default port of the service. */
    const DEFAULT_SERVICE_PORT = 443;

    /** The name of the code generator, to be included in the agent header. */
    const CODEGEN_NAME = 'gapic';

    /** The default scopes required by the service. */
    public static $serviceScopes = [
        'https://www.googleapis.com/auth/bigtable.admin',
        'https://www.googleapis.com/auth/bigtable.admin.table',
        'https://www.googleapis.com/auth/cloud-bigtable.admin',
        'https://www.googleapis.com/auth/cloud-bigtable.admin.table',
        'https://www.googleapis.com/auth/cloud-platform',
        'https://www.googleapis.com/auth/cloud-platform.read-only',
    ];

    private static $backupNameTemplate;

    private static $clusterNameTemplate;

    private static $instanceNameTemplate;

    private static $snapshotNameTemplate;

    private static $tableNameTemplate;

    private static $pathTemplateMap;

    private $operationsClient;

    private static function getClientDefaults()
    {
        return [
            'serviceName' => self::SERVICE_NAME,
            'apiEndpoint' => self::SERVICE_ADDRESS . ':' . self::DEFAULT_SERVICE_PORT,
            'clientConfig' => __DIR__ . '/../resources/bigtable_table_admin_client_config.json',
            'descriptorsConfigPath' => __DIR__ . '/../resources/bigtable_table_admin_descriptor_config.php',
            'gcpApiConfigPath' => __DIR__ . '/../resources/bigtable_table_admin_grpc_config.json',
            'credentialsConfig' => [
                'defaultScopes' => self::$serviceScopes,
            ],
            'transportConfig' => [
                'rest' => [
                    'restClientConfigPath' => __DIR__ . '/../resources/bigtable_table_admin_rest_client_config.php',
                ],
            ],
        ];
    }

    private static function getBackupNameTemplate()
    {
        if (self::$backupNameTemplate == null) {
            self::$backupNameTemplate = new PathTemplate('projects/{project}/instances/{instance}/clusters/{cluster}/backups/{backup}');
        }

        return self::$backupNameTemplate;
    }

    private static function getClusterNameTemplate()
    {
        if (self::$clusterNameTemplate == null) {
            self::$clusterNameTemplate = new PathTemplate('projects/{project}/instances/{instance}/clusters/{cluster}');
        }

        return self::$clusterNameTemplate;
    }

    private static function getInstanceNameTemplate()
    {
        if (self::$instanceNameTemplate == null) {
            self::$instanceNameTemplate = new PathTemplate('projects/{project}/instances/{instance}');
        }

        return self::$instanceNameTemplate;
    }

    private static function getSnapshotNameTemplate()
    {
        if (self::$snapshotNameTemplate == null) {
            self::$snapshotNameTemplate = new PathTemplate('projects/{project}/instances/{instance}/clusters/{cluster}/snapshots/{snapshot}');
        }

        return self::$snapshotNameTemplate;
    }

    private static function getTableNameTemplate()
    {
        if (self::$tableNameTemplate == null) {
            self::$tableNameTemplate = new PathTemplate('projects/{project}/instances/{instance}/tables/{table}');
        }

        return self::$tableNameTemplate;
    }

    private static function getPathTemplateMap()
    {
        if (self::$pathTemplateMap == null) {
            self::$pathTemplateMap = [
                'backup' => self::getBackupNameTemplate(),
                'cluster' => self::getClusterNameTemplate(),
                'instance' => self::getInstanceNameTemplate(),
                'snapshot' => self::getSnapshotNameTemplate(),
                'table' => self::getTableNameTemplate(),
            ];
        }

        return self::$pathTemplateMap;
    }

    /**
     * Formats a string containing the fully-qualified path to represent a backup
     * resource.
     *
     * @param string $project
     * @param string $instance
     * @param string $cluster
     * @param string $backup
     *
     * @return string The formatted backup resource.
     */
    public static function backupName($project, $instance, $cluster, $backup)
    {
        return self::getBackupNameTemplate()->render([
            'project' => $project,
            'instance' => $instance,
            'cluster' => $cluster,
            'backup' => $backup,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a cluster
     * resource.
     *
     * @param string $project
     * @param string $instance
     * @param string $cluster
     *
     * @return string The formatted cluster resource.
     */
    public static function clusterName($project, $instance, $cluster)
    {
        return self::getClusterNameTemplate()->render([
            'project' => $project,
            'instance' => $instance,
            'cluster' => $cluster,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a instance
     * resource.
     *
     * @param string $project
     * @param string $instance
     *
     * @return string The formatted instance resource.
     */
    public static function instanceName($project, $instance)
    {
        return self::getInstanceNameTemplate()->render([
            'project' => $project,
            'instance' => $instance,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a snapshot
     * resource.
     *
     * @param string $project
     * @param string $instance
     * @param string $cluster
     * @param string $snapshot
     *
     * @return string The formatted snapshot resource.
     */
    public static function snapshotName($project, $instance, $cluster, $snapshot)
    {
        return self::getSnapshotNameTemplate()->render([
            'project' => $project,
            'instance' => $instance,
            'cluster' => $cluster,
            'snapshot' => $snapshot,
        ]);
    }

    /**
     * Formats a string containing the fully-qualified path to represent a table
     * resource.
     *
     * @param string $project
     * @param string $instance
     * @param string $table
     *
     * @return string The formatted table resource.
     */
    public static function tableName($project, $instance, $table)
    {
        return self::getTableNameTemplate()->render([
            'project' => $project,
            'instance' => $instance,
            'table' => $table,
        ]);
    }

    /**
     * Parses a formatted name string and returns an associative array of the components in the name.
     * The following name formats are supported:
     * Template: Pattern
     * - backup: projects/{project}/instances/{instance}/clusters/{cluster}/backups/{backup}
     * - cluster: projects/{project}/instances/{instance}/clusters/{cluster}
     * - instance: projects/{project}/instances/{instance}
     * - snapshot: projects/{project}/instances/{instance}/clusters/{cluster}/snapshots/{snapshot}
     * - table: projects/{project}/instances/{instance}/tables/{table}
     *
     * The optional $template argument can be supplied to specify a particular pattern,
     * and must match one of the templates listed above. If no $template argument is
     * provided, or if the $template argument does not match one of the templates
     * listed, then parseName will check each of the supported templates, and return
     * the first match.
     *
     * @param string $formattedName The formatted name string
     * @param string $template      Optional name of template to match
     *
     * @return array An associative array from name component IDs to component values.
     *
     * @throws ValidationException If $formattedName could not be matched.
     */
    public static function parseName($formattedName, $template = null)
    {
        $templateMap = self::getPathTemplateMap();
        if ($template) {
            if (!isset($templateMap[$template])) {
                throw new ValidationException("Template name $template does not exist");
            }

            return $templateMap[$template]->match($formattedName);
        }

        foreach ($templateMap as $templateName => $pathTemplate) {
            try {
                return $pathTemplate->match($formattedName);
            } catch (ValidationException $ex) {
                // Swallow the exception to continue trying other path templates
            }
        }

        throw new ValidationException("Input did not match any known format. Input: $formattedName");
    }

    /**
     * Return an OperationsClient object with the same endpoint as $this.
     *
     * @return OperationsClient
     */
    public function getOperationsClient()
    {
        return $this->operationsClient;
    }

    /**
     * Resume an existing long running operation that was previously started by a long
     * running API method. If $methodName is not provided, or does not match a long
     * running API method, then the operation can still be resumed, but the
     * OperationResponse object will not deserialize the final response.
     *
     * @param string $operationName The name of the long running operation
     * @param string $methodName    The name of the method used to start the operation
     *
     * @return OperationResponse
     */
    public function resumeOperation($operationName, $methodName = null)
    {
        $options = isset($this->descriptors[$methodName]['longRunning']) ? $this->descriptors[$methodName]['longRunning'] : [];
        $operation = new OperationResponse($operationName, $this->getOperationsClient(), $options);
        $operation->reload();
        return $operation;
    }

    /**
     * Constructor.
     *
     * @param array $options {
     *     Optional. Options for configuring the service API wrapper.
     *
     *     @type string $apiEndpoint
     *           The address of the API remote host. May optionally include the port, formatted
     *           as "<uri>:<port>". Default 'bigtableadmin.googleapis.com:443'.
     *     @type string|array|FetchAuthTokenInterface|CredentialsWrapper $credentials
     *           The credentials to be used by the client to authorize API calls. This option
     *           accepts either a path to a credentials file, or a decoded credentials file as a
     *           PHP array.
     *           *Advanced usage*: In addition, this option can also accept a pre-constructed
     *           {@see \Google\Auth\FetchAuthTokenInterface} object or
     *           {@see \Google\ApiCore\CredentialsWrapper} object. Note that when one of these
     *           objects are provided, any settings in $credentialsConfig will be ignored.
     *     @type array $credentialsConfig
     *           Options used to configure credentials, including auth token caching, for the
     *           client. For a full list of supporting configuration options, see
     *           {@see \Google\ApiCore\CredentialsWrapper::build()} .
     *     @type bool $disableRetries
     *           Determines whether or not retries defined by the client configuration should be
     *           disabled. Defaults to `false`.
     *     @type string|array $clientConfig
     *           Client method configuration, including retry settings. This option can be either
     *           a path to a JSON file, or a PHP array containing the decoded JSON data. By
     *           default this settings points to the default client config file, which is
     *           provided in the resources folder.
     *     @type string|TransportInterface $transport
     *           The transport used for executing network requests. May be either the string
     *           `rest` or `grpc`. Defaults to `grpc` if gRPC support is detected on the system.
     *           *Advanced usage*: Additionally, it is possible to pass in an already
     *           instantiated {@see \Google\ApiCore\Transport\TransportInterface} object. Note
     *           that when this object is provided, any settings in $transportConfig, and any
     *           $apiEndpoint setting, will be ignored.
     *     @type array $transportConfig
     *           Configuration options that will be used to construct the transport. Options for
     *           each supported transport type should be passed in a key for that transport. For
     *           example:
     *           $transportConfig = [
     *               'grpc' => [...],
     *               'rest' => [...],
     *           ];
     *           See the {@see \Google\ApiCore\Transport\GrpcTransport::build()} and
     *           {@see \Google\ApiCore\Transport\RestTransport::build()} methods for the
     *           supported options.
     *     @type callable $clientCertSource
     *           A callable which returns the client cert as a string. This can be used to
     *           provide a certificate and private key to the transport layer for mTLS.
     * }
     *
     * @throws ValidationException
     */
    public function __construct(array $options = [])
    {
        $clientOptions = $this->buildClientOptions($options);
        $this->setClientOptions($clientOptions);
        $this->operationsClient = $this->createOperationsClient($clientOptions);
    }

    /**
     * Checks replication consistency based on a consistency token, that is, if
     * replication has caught up based on the conditions specified in the token
     * and the check request.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $consistencyToken = 'consistency_token';
     *     $response = $bigtableTableAdminClient->checkConsistency($formattedName, $consistencyToken);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name             Required. The unique name of the Table for which to check replication consistency.
     *                                 Values are of the form
     *                                 `projects/{project}/instances/{instance}/tables/{table}`.
     * @param string $consistencyToken Required. The token created using GenerateConsistencyToken for the Table.
     * @param array  $optionalArgs     {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\CheckConsistencyResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function checkConsistency($name, $consistencyToken, array $optionalArgs = [])
    {
        $request = new CheckConsistencyRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setConsistencyToken($consistencyToken);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CheckConsistency', CheckConsistencyResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Starts creating a new Cloud Bigtable Backup.  The returned backup
     * [long-running operation][google.longrunning.Operation] can be used to
     * track creation of the backup. The
     * [metadata][google.longrunning.Operation.metadata] field type is
     * [CreateBackupMetadata][google.bigtable.admin.v2.CreateBackupMetadata]. The
     * [response][google.longrunning.Operation.response] field type is
     * [Backup][google.bigtable.admin.v2.Backup], if successful. Cancelling the returned operation will stop the
     * creation and delete the backup.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->clusterName('[PROJECT]', '[INSTANCE]', '[CLUSTER]');
     *     $backupId = 'backup_id';
     *     $backup = new Backup();
     *     $operationResponse = $bigtableTableAdminClient->createBackup($formattedParent, $backupId, $backup);
     *     $operationResponse->pollUntilComplete();
     *     if ($operationResponse->operationSucceeded()) {
     *         $result = $operationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $operationResponse->getError();
     *         // handleError($error)
     *     }
     *     // Alternatively:
     *     // start the operation, keep the operation name, and resume later
     *     $operationResponse = $bigtableTableAdminClient->createBackup($formattedParent, $backupId, $backup);
     *     $operationName = $operationResponse->getName();
     *     // ... do other work
     *     $newOperationResponse = $bigtableTableAdminClient->resumeOperation($operationName, 'createBackup');
     *     while (!$newOperationResponse->isDone()) {
     *         // ... do other work
     *         $newOperationResponse->reload();
     *     }
     *     if ($newOperationResponse->operationSucceeded()) {
     *         $result = $newOperationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $newOperationResponse->getError();
     *         // handleError($error)
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. This must be one of the clusters in the instance in which this
     *                             table is located. The backup will be stored in this cluster. Values are
     *                             of the form `projects/{project}/instances/{instance}/clusters/{cluster}`.
     * @param string $backupId     Required. The id of the backup to be created. The `backup_id` along with
     *                             the parent `parent` are combined as {parent}/backups/{backup_id} to create
     *                             the full backup name, of the form:
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}/backups/{backup_id}`.
     *                             This string must be between 1 and 50 characters in length and match the
     *                             regex [_a-zA-Z0-9][-_.a-zA-Z0-9]*.
     * @param Backup $backup       Required. The backup to create.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\OperationResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function createBackup($parent, $backupId, $backup, array $optionalArgs = [])
    {
        $request = new CreateBackupRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setBackupId($backupId);
        $request->setBackup($backup);
        $requestParamHeaders['parent'] = $parent;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startOperationsCall('CreateBackup', $optionalArgs, $request, $this->getOperationsClient())->wait();
    }

    /**
     * Creates a new table in the specified instance.
     * The table can be created with a full set of initial column families,
     * specified in the request.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->instanceName('[PROJECT]', '[INSTANCE]');
     *     $tableId = 'table_id';
     *     $table = new Google\Cloud\Bigtable\Admin\V2\Table();
     *     $response = $bigtableTableAdminClient->createTable($formattedParent, $tableId, $table);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The unique name of the instance in which to create the table.
     *                             Values are of the form `projects/{project}/instances/{instance}`.
     * @param string $tableId      Required. The name by which the new table should be referred to within the parent
     *                             instance, e.g., `foobar` rather than `{parent}/tables/foobar`.
     *                             Maximum 50 characters.
     * @param Table  $table        Required. The Table to create.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type Split[] $initialSplits
     *           The optional list of row keys that will be used to initially split the
     *           table into several tablets (tablets are similar to HBase regions).
     *           Given two split keys, `s1` and `s2`, three tablets will be created,
     *           spanning the key ranges: `[, s1), [s1, s2), [s2, )`.
     *
     *           Example:
     *
     *           * Row keys := `["a", "apple", "custom", "customer_1", "customer_2",`
     *           `"other", "zz"]`
     *           * initial_split_keys := `["apple", "customer_1", "customer_2", "other"]`
     *           * Key assignment:
     *           - Tablet 1 `[, apple)                => {"a"}.`
     *           - Tablet 2 `[apple, customer_1)      => {"apple", "custom"}.`
     *           - Tablet 3 `[customer_1, customer_2) => {"customer_1"}.`
     *           - Tablet 4 `[customer_2, other)      => {"customer_2"}.`
     *           - Tablet 5 `[other, )                => {"other", "zz"}.`
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\Table
     *
     * @throws ApiException if the remote call fails
     */
    public function createTable($parent, $tableId, $table, array $optionalArgs = [])
    {
        $request = new CreateTableRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setTableId($tableId);
        $request->setTable($table);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['initialSplits'])) {
            $request->setInitialSplits($optionalArgs['initialSplits']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('CreateTable', Table::class, $optionalArgs, $request)->wait();
    }

    /**
     * Creates a new table from the specified snapshot. The target table must
     * not exist. The snapshot and the table must be in the same instance.
     *
     * Note: This is a private alpha release of Cloud Bigtable snapshots. This
     * feature is not currently available to most Cloud Bigtable customers. This
     * feature might be changed in backward-incompatible ways and is not
     * recommended for production use. It is not subject to any SLA or deprecation
     * policy.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->instanceName('[PROJECT]', '[INSTANCE]');
     *     $tableId = 'table_id';
     *     $formattedSourceSnapshot = $bigtableTableAdminClient->snapshotName('[PROJECT]', '[INSTANCE]', '[CLUSTER]', '[SNAPSHOT]');
     *     $operationResponse = $bigtableTableAdminClient->createTableFromSnapshot($formattedParent, $tableId, $formattedSourceSnapshot);
     *     $operationResponse->pollUntilComplete();
     *     if ($operationResponse->operationSucceeded()) {
     *         $result = $operationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $operationResponse->getError();
     *         // handleError($error)
     *     }
     *     // Alternatively:
     *     // start the operation, keep the operation name, and resume later
     *     $operationResponse = $bigtableTableAdminClient->createTableFromSnapshot($formattedParent, $tableId, $formattedSourceSnapshot);
     *     $operationName = $operationResponse->getName();
     *     // ... do other work
     *     $newOperationResponse = $bigtableTableAdminClient->resumeOperation($operationName, 'createTableFromSnapshot');
     *     while (!$newOperationResponse->isDone()) {
     *         // ... do other work
     *         $newOperationResponse->reload();
     *     }
     *     if ($newOperationResponse->operationSucceeded()) {
     *         $result = $newOperationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $newOperationResponse->getError();
     *         // handleError($error)
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent         Required. The unique name of the instance in which to create the table.
     *                               Values are of the form `projects/{project}/instances/{instance}`.
     * @param string $tableId        Required. The name by which the new table should be referred to within the parent
     *                               instance, e.g., `foobar` rather than `{parent}/tables/foobar`.
     * @param string $sourceSnapshot Required. The unique name of the snapshot from which to restore the table. The
     *                               snapshot and the table must be in the same instance.
     *                               Values are of the form
     *                               `projects/{project}/instances/{instance}/clusters/{cluster}/snapshots/{snapshot}`.
     * @param array  $optionalArgs   {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\OperationResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function createTableFromSnapshot($parent, $tableId, $sourceSnapshot, array $optionalArgs = [])
    {
        $request = new CreateTableFromSnapshotRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setTableId($tableId);
        $request->setSourceSnapshot($sourceSnapshot);
        $requestParamHeaders['parent'] = $parent;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startOperationsCall('CreateTableFromSnapshot', $optionalArgs, $request, $this->getOperationsClient())->wait();
    }

    /**
     * Deletes a pending or completed Cloud Bigtable backup.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->backupName('[PROJECT]', '[INSTANCE]', '[CLUSTER]', '[BACKUP]');
     *     $bigtableTableAdminClient->deleteBackup($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. Name of the backup to delete.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}/backups/{backup}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function deleteBackup($name, array $optionalArgs = [])
    {
        $request = new DeleteBackupRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteBackup', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Permanently deletes the specified snapshot.
     *
     * Note: This is a private alpha release of Cloud Bigtable snapshots. This
     * feature is not currently available to most Cloud Bigtable customers. This
     * feature might be changed in backward-incompatible ways and is not
     * recommended for production use. It is not subject to any SLA or deprecation
     * policy.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->snapshotName('[PROJECT]', '[INSTANCE]', '[CLUSTER]', '[SNAPSHOT]');
     *     $bigtableTableAdminClient->deleteSnapshot($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the snapshot to be deleted.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}/snapshots/{snapshot}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function deleteSnapshot($name, array $optionalArgs = [])
    {
        $request = new DeleteSnapshotRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteSnapshot', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Permanently deletes a specified table and all of its data.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $bigtableTableAdminClient->deleteTable($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the table to be deleted.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/tables/{table}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function deleteTable($name, array $optionalArgs = [])
    {
        $request = new DeleteTableRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DeleteTable', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Permanently drop/delete a row range from a specified table. The request can
     * specify whether to delete all rows in a table, or only those that match a
     * particular prefix.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $bigtableTableAdminClient->dropRowRange($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the table on which to drop a range of rows.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/tables/{table}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type string $rowKeyPrefix
     *           Delete all rows that start with this row key prefix. Prefix cannot be
     *           zero length.
     *     @type bool $deleteAllDataFromTable
     *           Delete all rows in the table. Setting this to false is a no-op.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @throws ApiException if the remote call fails
     */
    public function dropRowRange($name, array $optionalArgs = [])
    {
        $request = new DropRowRangeRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['rowKeyPrefix'])) {
            $request->setRowKeyPrefix($optionalArgs['rowKeyPrefix']);
        }

        if (isset($optionalArgs['deleteAllDataFromTable'])) {
            $request->setDeleteAllDataFromTable($optionalArgs['deleteAllDataFromTable']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('DropRowRange', GPBEmpty::class, $optionalArgs, $request)->wait();
    }

    /**
     * Generates a consistency token for a Table, which can be used in
     * CheckConsistency to check whether mutations to the table that finished
     * before this call started have been replicated. The tokens will be available
     * for 90 days.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $response = $bigtableTableAdminClient->generateConsistencyToken($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the Table for which to create a consistency token.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/tables/{table}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\GenerateConsistencyTokenResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function generateConsistencyToken($name, array $optionalArgs = [])
    {
        $request = new GenerateConsistencyTokenRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GenerateConsistencyToken', GenerateConsistencyTokenResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets metadata on a pending or completed Cloud Bigtable Backup.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->backupName('[PROJECT]', '[INSTANCE]', '[CLUSTER]', '[BACKUP]');
     *     $response = $bigtableTableAdminClient->getBackup($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. Name of the backup.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}/backups/{backup}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\Backup
     *
     * @throws ApiException if the remote call fails
     */
    public function getBackup($name, array $optionalArgs = [])
    {
        $request = new GetBackupRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetBackup', Backup::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets the access control policy for a Table or Backup resource.
     * Returns an empty policy if the resource exists but does not have a policy
     * set.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $resource = 'resource';
     *     $response = $bigtableTableAdminClient->getIamPolicy($resource);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $resource     REQUIRED: The resource for which the policy is being requested.
     *                             See the operation documentation for the appropriate value for this field.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type GetPolicyOptions $options
     *           OPTIONAL: A `GetPolicyOptions` object for specifying options to
     *           `GetIamPolicy`.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\Policy
     *
     * @throws ApiException if the remote call fails
     */
    public function getIamPolicy($resource, array $optionalArgs = [])
    {
        $request = new GetIamPolicyRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $requestParamHeaders['resource'] = $resource;
        if (isset($optionalArgs['options'])) {
            $request->setOptions($optionalArgs['options']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetIamPolicy', Policy::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets metadata information about the specified snapshot.
     *
     * Note: This is a private alpha release of Cloud Bigtable snapshots. This
     * feature is not currently available to most Cloud Bigtable customers. This
     * feature might be changed in backward-incompatible ways and is not
     * recommended for production use. It is not subject to any SLA or deprecation
     * policy.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->snapshotName('[PROJECT]', '[INSTANCE]', '[CLUSTER]', '[SNAPSHOT]');
     *     $response = $bigtableTableAdminClient->getSnapshot($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the requested snapshot.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}/snapshots/{snapshot}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\Snapshot
     *
     * @throws ApiException if the remote call fails
     */
    public function getSnapshot($name, array $optionalArgs = [])
    {
        $request = new GetSnapshotRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetSnapshot', Snapshot::class, $optionalArgs, $request)->wait();
    }

    /**
     * Gets metadata information about the specified table.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $response = $bigtableTableAdminClient->getTable($formattedName);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the requested table.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/tables/{table}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $view
     *           The view to be applied to the returned table's fields.
     *           Defaults to `SCHEMA_VIEW` if unspecified.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Bigtable\Admin\V2\Table\View}
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\Table
     *
     * @throws ApiException if the remote call fails
     */
    public function getTable($name, array $optionalArgs = [])
    {
        $request = new GetTableRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['view'])) {
            $request->setView($optionalArgs['view']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('GetTable', Table::class, $optionalArgs, $request)->wait();
    }

    /**
     * Lists Cloud Bigtable backups. Returns both completed and pending
     * backups.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->clusterName('[PROJECT]', '[INSTANCE]', '[CLUSTER]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $bigtableTableAdminClient->listBackups($formattedParent);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $bigtableTableAdminClient->listBackups($formattedParent);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The cluster to list backups from.  Values are of the
     *                             form `projects/{project}/instances/{instance}/clusters/{cluster}`.
     *                             Use `{cluster} = '-'` to list backups for all clusters in an instance,
     *                             e.g., `projects/{project}/instances/{instance}/clusters/-`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type string $filter
     *           A filter expression that filters backups listed in the response.
     *           The expression must specify the field name, a comparison operator,
     *           and the value that you want to use for filtering. The value must be a
     *           string, a number, or a boolean. The comparison operator must be
     *           <, >, <=, >=, !=, =, or :. Colon ':' represents a HAS operator which is
     *           roughly synonymous with equality. Filter rules are case insensitive.
     *
     *           The fields eligible for filtering are:
     *           * `name`
     *           * `source_table`
     *           * `state`
     *           * `start_time` (and values are of the format YYYY-MM-DDTHH:MM:SSZ)
     *           * `end_time` (and values are of the format YYYY-MM-DDTHH:MM:SSZ)
     *           * `expire_time` (and values are of the format YYYY-MM-DDTHH:MM:SSZ)
     *           * `size_bytes`
     *
     *           To filter on multiple expressions, provide each separate expression within
     *           parentheses. By default, each expression is an AND expression. However,
     *           you can include AND, OR, and NOT expressions explicitly.
     *
     *           Some examples of using filters are:
     *
     *           * `name:"exact"` --> The backup's name is the string "exact".
     *           * `name:howl` --> The backup's name contains the string "howl".
     *           * `source_table:prod`
     *           --> The source_table's name contains the string "prod".
     *           * `state:CREATING` --> The backup is pending creation.
     *           * `state:READY` --> The backup is fully created and ready for use.
     *           * `(name:howl) AND (start_time < \"2018-03-28T14:50:00Z\")`
     *           --> The backup name contains the string "howl" and start_time
     *           of the backup is before 2018-03-28T14:50:00Z.
     *           * `size_bytes > 10000000000` --> The backup's size is greater than 10GB
     *     @type string $orderBy
     *           An expression for specifying the sort order of the results of the request.
     *           The string value should specify one or more fields in [Backup][google.bigtable.admin.v2.Backup]. The full
     *           syntax is described at https://aip.dev/132#ordering.
     *
     *           Fields supported are:
     *           * name
     *           * source_table
     *           * expire_time
     *           * start_time
     *           * end_time
     *           * size_bytes
     *           * state
     *
     *           For example, "start_time". The default sorting order is ascending.
     *           To specify descending order for the field, a suffix " desc" should
     *           be appended to the field name. For example, "start_time desc".
     *           Redundant space characters in the syntax are insigificant.
     *
     *           If order_by is empty, results will be sorted by `start_time` in descending
     *           order starting from the most recently created backup.
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function listBackups($parent, array $optionalArgs = [])
    {
        $request = new ListBackupsRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['filter'])) {
            $request->setFilter($optionalArgs['filter']);
        }

        if (isset($optionalArgs['orderBy'])) {
            $request->setOrderBy($optionalArgs['orderBy']);
        }

        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListBackups', $optionalArgs, ListBackupsResponse::class, $request);
    }

    /**
     * Lists all snapshots associated with the specified cluster.
     *
     * Note: This is a private alpha release of Cloud Bigtable snapshots. This
     * feature is not currently available to most Cloud Bigtable customers. This
     * feature might be changed in backward-incompatible ways and is not
     * recommended for production use. It is not subject to any SLA or deprecation
     * policy.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->clusterName('[PROJECT]', '[INSTANCE]', '[CLUSTER]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $bigtableTableAdminClient->listSnapshots($formattedParent);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $bigtableTableAdminClient->listSnapshots($formattedParent);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The unique name of the cluster for which snapshots should be listed.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}`.
     *                             Use `{cluster} = '-'` to list snapshots for all clusters in an instance,
     *                             e.g., `projects/{project}/instances/{instance}/clusters/-`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function listSnapshots($parent, array $optionalArgs = [])
    {
        $request = new ListSnapshotsRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListSnapshots', $optionalArgs, ListSnapshotsResponse::class, $request);
    }

    /**
     * Lists all tables served from a specified instance.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->instanceName('[PROJECT]', '[INSTANCE]');
     *     // Iterate over pages of elements
     *     $pagedResponse = $bigtableTableAdminClient->listTables($formattedParent);
     *     foreach ($pagedResponse->iteratePages() as $page) {
     *         foreach ($page as $element) {
     *             // doSomethingWith($element);
     *         }
     *     }
     *     // Alternatively:
     *     // Iterate through all elements
     *     $pagedResponse = $bigtableTableAdminClient->listTables($formattedParent);
     *     foreach ($pagedResponse->iterateAllElements() as $element) {
     *         // doSomethingWith($element);
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The unique name of the instance for which tables should be listed.
     *                             Values are of the form `projects/{project}/instances/{instance}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type int $view
     *           The view to be applied to the returned tables' fields.
     *           Only NAME_ONLY view (default) and REPLICATION_VIEW are supported.
     *           For allowed values, use constants defined on {@see \Google\Cloud\Bigtable\Admin\V2\Table\View}
     *     @type int $pageSize
     *           The maximum number of resources contained in the underlying API
     *           response. The API may return fewer values in a page, even if
     *           there are additional values to be retrieved.
     *     @type string $pageToken
     *           A page token is used to specify a page of values to be returned.
     *           If no page token is specified (the default), the first page
     *           of values will be returned. Any page token used here must have
     *           been generated by a previous call to the API.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\PagedListResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function listTables($parent, array $optionalArgs = [])
    {
        $request = new ListTablesRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['view'])) {
            $request->setView($optionalArgs['view']);
        }

        if (isset($optionalArgs['pageSize'])) {
            $request->setPageSize($optionalArgs['pageSize']);
        }

        if (isset($optionalArgs['pageToken'])) {
            $request->setPageToken($optionalArgs['pageToken']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->getPagedListResponse('ListTables', $optionalArgs, ListTablesResponse::class, $request);
    }

    /**
     * Performs a series of column family modifications on the specified table.
     * Either all or none of the modifications will occur before this method
     * returns, but data requests received prior to that point may see a table
     * where only some modifications have taken effect.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $modifications = [];
     *     $response = $bigtableTableAdminClient->modifyColumnFamilies($formattedName, $modifications);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string         $name          Required. The unique name of the table whose families should be modified.
     *                                      Values are of the form
     *                                      `projects/{project}/instances/{instance}/tables/{table}`.
     * @param Modification[] $modifications Required. Modifications to be atomically applied to the specified table's families.
     *                                      Entries are applied in order, meaning that earlier modifications can be
     *                                      masked by later ones (in the case of repeated updates to the same family,
     *                                      for example).
     * @param array          $optionalArgs  {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\Table
     *
     * @throws ApiException if the remote call fails
     */
    public function modifyColumnFamilies($name, $modifications, array $optionalArgs = [])
    {
        $request = new ModifyColumnFamiliesRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setModifications($modifications);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('ModifyColumnFamilies', Table::class, $optionalArgs, $request)->wait();
    }

    /**
     * Create a new table by restoring from a completed backup. The new table
     * must be in the same project as the instance containing the backup.  The
     * returned table [long-running operation][google.longrunning.Operation] can
     * be used to track the progress of the operation, and to cancel it.  The
     * [metadata][google.longrunning.Operation.metadata] field type is
     * [RestoreTableMetadata][google.bigtable.admin.RestoreTableMetadata].  The
     * [response][google.longrunning.Operation.response] type is
     * [Table][google.bigtable.admin.v2.Table], if successful.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedParent = $bigtableTableAdminClient->instanceName('[PROJECT]', '[INSTANCE]');
     *     $tableId = 'table_id';
     *     $operationResponse = $bigtableTableAdminClient->restoreTable($formattedParent, $tableId);
     *     $operationResponse->pollUntilComplete();
     *     if ($operationResponse->operationSucceeded()) {
     *         $result = $operationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $operationResponse->getError();
     *         // handleError($error)
     *     }
     *     // Alternatively:
     *     // start the operation, keep the operation name, and resume later
     *     $operationResponse = $bigtableTableAdminClient->restoreTable($formattedParent, $tableId);
     *     $operationName = $operationResponse->getName();
     *     // ... do other work
     *     $newOperationResponse = $bigtableTableAdminClient->resumeOperation($operationName, 'restoreTable');
     *     while (!$newOperationResponse->isDone()) {
     *         // ... do other work
     *         $newOperationResponse->reload();
     *     }
     *     if ($newOperationResponse->operationSucceeded()) {
     *         $result = $newOperationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $newOperationResponse->getError();
     *         // handleError($error)
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $parent       Required. The name of the instance in which to create the restored
     *                             table. This instance must be in the same project as the source backup.
     *                             Values are of the form `projects/<project>/instances/<instance>`.
     * @param string $tableId      Required. The id of the table to create and restore to. This
     *                             table must not already exist. The `table_id` appended to
     *                             `parent` forms the full table name of the form
     *                             `projects/<project>/instances/<instance>/tables/<table_id>`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type string $backup
     *           Name of the backup from which to restore.  Values are of the form
     *           `projects/<project>/instances/<instance>/clusters/<cluster>/backups/<backup>`.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\OperationResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function restoreTable($parent, $tableId, array $optionalArgs = [])
    {
        $request = new RestoreTableRequest();
        $requestParamHeaders = [];
        $request->setParent($parent);
        $request->setTableId($tableId);
        $requestParamHeaders['parent'] = $parent;
        if (isset($optionalArgs['backup'])) {
            $request->setBackup($optionalArgs['backup']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startOperationsCall('RestoreTable', $optionalArgs, $request, $this->getOperationsClient())->wait();
    }

    /**
     * Sets the access control policy on a Table or Backup resource.
     * Replaces any existing policy.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $resource = 'resource';
     *     $policy = new Google\Cloud\Iam\V1\Policy();
     *     $response = $bigtableTableAdminClient->setIamPolicy($resource, $policy);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $resource     REQUIRED: The resource for which the policy is being specified.
     *                             See the operation documentation for the appropriate value for this field.
     * @param Policy $policy       REQUIRED: The complete policy to be applied to the `resource`. The size of
     *                             the policy is limited to a few 10s of KB. An empty policy is a
     *                             valid policy but certain Cloud Platform services (such as Projects)
     *                             might reject them.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type FieldMask $updateMask
     *           OPTIONAL: A FieldMask specifying which fields of the policy to modify. Only
     *           the fields in the mask will be modified. If no mask is provided, the
     *           following default mask is used:
     *
     *           `paths: "bindings, etag"`
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\Policy
     *
     * @throws ApiException if the remote call fails
     */
    public function setIamPolicy($resource, $policy, array $optionalArgs = [])
    {
        $request = new SetIamPolicyRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $request->setPolicy($policy);
        $requestParamHeaders['resource'] = $resource;
        if (isset($optionalArgs['updateMask'])) {
            $request->setUpdateMask($optionalArgs['updateMask']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('SetIamPolicy', Policy::class, $optionalArgs, $request)->wait();
    }

    /**
     * Creates a new snapshot in the specified cluster from the specified
     * source table. The cluster and the table must be in the same instance.
     *
     * Note: This is a private alpha release of Cloud Bigtable snapshots. This
     * feature is not currently available to most Cloud Bigtable customers. This
     * feature might be changed in backward-incompatible ways and is not
     * recommended for production use. It is not subject to any SLA or deprecation
     * policy.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $formattedCluster = $bigtableTableAdminClient->clusterName('[PROJECT]', '[INSTANCE]', '[CLUSTER]');
     *     $snapshotId = 'snapshot_id';
     *     $operationResponse = $bigtableTableAdminClient->snapshotTable($formattedName, $formattedCluster, $snapshotId);
     *     $operationResponse->pollUntilComplete();
     *     if ($operationResponse->operationSucceeded()) {
     *         $result = $operationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $operationResponse->getError();
     *         // handleError($error)
     *     }
     *     // Alternatively:
     *     // start the operation, keep the operation name, and resume later
     *     $operationResponse = $bigtableTableAdminClient->snapshotTable($formattedName, $formattedCluster, $snapshotId);
     *     $operationName = $operationResponse->getName();
     *     // ... do other work
     *     $newOperationResponse = $bigtableTableAdminClient->resumeOperation($operationName, 'snapshotTable');
     *     while (!$newOperationResponse->isDone()) {
     *         // ... do other work
     *         $newOperationResponse->reload();
     *     }
     *     if ($newOperationResponse->operationSucceeded()) {
     *         $result = $newOperationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $newOperationResponse->getError();
     *         // handleError($error)
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the table to have the snapshot taken.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/tables/{table}`.
     * @param string $cluster      Required. The name of the cluster where the snapshot will be created in.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}`.
     * @param string $snapshotId   Required. The ID by which the new snapshot should be referred to within the parent
     *                             cluster, e.g., `mysnapshot` of the form: `[_a-zA-Z0-9][-_.a-zA-Z0-9]*`
     *                             rather than
     *                             `projects/{project}/instances/{instance}/clusters/{cluster}/snapshots/mysnapshot`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type Duration $ttl
     *           The amount of time that the new snapshot can stay active after it is
     *           created. Once 'ttl' expires, the snapshot will get deleted. The maximum
     *           amount of time a snapshot can stay active is 7 days. If 'ttl' is not
     *           specified, the default value of 24 hours will be used.
     *     @type string $description
     *           Description of the snapshot.
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\OperationResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function snapshotTable($name, $cluster, $snapshotId, array $optionalArgs = [])
    {
        $request = new SnapshotTableRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $request->setCluster($cluster);
        $request->setSnapshotId($snapshotId);
        $requestParamHeaders['name'] = $name;
        if (isset($optionalArgs['ttl'])) {
            $request->setTtl($optionalArgs['ttl']);
        }

        if (isset($optionalArgs['description'])) {
            $request->setDescription($optionalArgs['description']);
        }

        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startOperationsCall('SnapshotTable', $optionalArgs, $request, $this->getOperationsClient())->wait();
    }

    /**
     * Returns permissions that the caller has on the specified Table or Backup resource.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $resource = 'resource';
     *     $permissions = [];
     *     $response = $bigtableTableAdminClient->testIamPermissions($resource, $permissions);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string   $resource     REQUIRED: The resource for which the policy detail is being requested.
     *                               See the operation documentation for the appropriate value for this field.
     * @param string[] $permissions  The set of permissions to check for the `resource`. Permissions with
     *                               wildcards (such as '*' or 'storage.*') are not allowed. For more
     *                               information see
     *                               [IAM Overview](https://cloud.google.com/iam/docs/overview#permissions).
     * @param array    $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Iam\V1\TestIamPermissionsResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function testIamPermissions($resource, $permissions, array $optionalArgs = [])
    {
        $request = new TestIamPermissionsRequest();
        $requestParamHeaders = [];
        $request->setResource($resource);
        $request->setPermissions($permissions);
        $requestParamHeaders['resource'] = $resource;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('TestIamPermissions', TestIamPermissionsResponse::class, $optionalArgs, $request)->wait();
    }

    /**
     * Restores a specified table which was accidentally deleted.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $formattedName = $bigtableTableAdminClient->tableName('[PROJECT]', '[INSTANCE]', '[TABLE]');
     *     $operationResponse = $bigtableTableAdminClient->undeleteTable($formattedName);
     *     $operationResponse->pollUntilComplete();
     *     if ($operationResponse->operationSucceeded()) {
     *         $result = $operationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $operationResponse->getError();
     *         // handleError($error)
     *     }
     *     // Alternatively:
     *     // start the operation, keep the operation name, and resume later
     *     $operationResponse = $bigtableTableAdminClient->undeleteTable($formattedName);
     *     $operationName = $operationResponse->getName();
     *     // ... do other work
     *     $newOperationResponse = $bigtableTableAdminClient->resumeOperation($operationName, 'undeleteTable');
     *     while (!$newOperationResponse->isDone()) {
     *         // ... do other work
     *         $newOperationResponse->reload();
     *     }
     *     if ($newOperationResponse->operationSucceeded()) {
     *         $result = $newOperationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $newOperationResponse->getError();
     *         // handleError($error)
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param string $name         Required. The unique name of the table to be restored.
     *                             Values are of the form
     *                             `projects/{project}/instances/{instance}/tables/{table}`.
     * @param array  $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\OperationResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function undeleteTable($name, array $optionalArgs = [])
    {
        $request = new UndeleteTableRequest();
        $requestParamHeaders = [];
        $request->setName($name);
        $requestParamHeaders['name'] = $name;
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startOperationsCall('UndeleteTable', $optionalArgs, $request, $this->getOperationsClient())->wait();
    }

    /**
     * Updates a pending or completed Cloud Bigtable Backup.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $backup = new Backup();
     *     $updateMask = new Google\Protobuf\FieldMask();
     *     $response = $bigtableTableAdminClient->updateBackup($backup, $updateMask);
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param Backup    $backup       Required. The backup to update. `backup.name`, and the fields to be updated
     *                                as specified by `update_mask` are required. Other fields are ignored.
     *                                Update is only supported for the following fields:
     *                                * `backup.expire_time`.
     * @param FieldMask $updateMask   Required. A mask specifying which fields (e.g. `expire_time`) in the
     *                                Backup resource should be updated. This mask is relative to the Backup
     *                                resource, not to the request message. The field mask must always be
     *                                specified; this prevents any future fields from being erased accidentally
     *                                by clients that do not know about them.
     * @param array     $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\Cloud\Bigtable\Admin\V2\Backup
     *
     * @throws ApiException if the remote call fails
     */
    public function updateBackup($backup, $updateMask, array $optionalArgs = [])
    {
        $request = new UpdateBackupRequest();
        $requestParamHeaders = [];
        $request->setBackup($backup);
        $request->setUpdateMask($updateMask);
        $requestParamHeaders['backup.name'] = $backup->getName();
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startCall('UpdateBackup', Backup::class, $optionalArgs, $request)->wait();
    }

    /**
     * Updates a specified table.
     *
     * Sample code:
     * ```
     * $bigtableTableAdminClient = new Google\Cloud\Bigtable\Admin\V2\BigtableTableAdminClient();
     * try {
     *     $table = new Google\Cloud\Bigtable\Admin\V2\Table();
     *     $updateMask = new Google\Protobuf\FieldMask();
     *     $operationResponse = $bigtableTableAdminClient->updateTable($table, $updateMask);
     *     $operationResponse->pollUntilComplete();
     *     if ($operationResponse->operationSucceeded()) {
     *         $result = $operationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $operationResponse->getError();
     *         // handleError($error)
     *     }
     *     // Alternatively:
     *     // start the operation, keep the operation name, and resume later
     *     $operationResponse = $bigtableTableAdminClient->updateTable($table, $updateMask);
     *     $operationName = $operationResponse->getName();
     *     // ... do other work
     *     $newOperationResponse = $bigtableTableAdminClient->resumeOperation($operationName, 'updateTable');
     *     while (!$newOperationResponse->isDone()) {
     *         // ... do other work
     *         $newOperationResponse->reload();
     *     }
     *     if ($newOperationResponse->operationSucceeded()) {
     *         $result = $newOperationResponse->getResult();
     *     // doSomethingWith($result)
     *     } else {
     *         $error = $newOperationResponse->getError();
     *         // handleError($error)
     *     }
     * } finally {
     *     $bigtableTableAdminClient->close();
     * }
     * ```
     *
     * @param Table     $table        Required. The table to update.
     *                                The table's `name` field is used to identify the table to update.
     * @param FieldMask $updateMask   Required. The list of fields to update.
     *                                A mask specifying which fields (e.g. `deletion_protection`) in the `table`
     *                                field should be updated. This mask is relative to the `table` field, not to
     *                                the request message. The wildcard (*) path is currently not supported.
     *                                Currently UpdateTable is only supported for the following field:
     *                                * `deletion_protection`
     *                                If `column_families` is set in `update_mask`, it will return an
     *                                UNIMPLEMENTED error.
     * @param array     $optionalArgs {
     *     Optional.
     *
     *     @type RetrySettings|array $retrySettings
     *           Retry settings to use for this call. Can be a {@see RetrySettings} object, or an
     *           associative array of retry settings parameters. See the documentation on
     *           {@see RetrySettings} for example usage.
     * }
     *
     * @return \Google\ApiCore\OperationResponse
     *
     * @throws ApiException if the remote call fails
     */
    public function updateTable($table, $updateMask, array $optionalArgs = [])
    {
        $request = new UpdateTableRequest();
        $requestParamHeaders = [];
        $request->setTable($table);
        $request->setUpdateMask($updateMask);
        $requestParamHeaders['table.name'] = $table->getName();
        $requestParams = new RequestParamsHeaderDescriptor($requestParamHeaders);
        $optionalArgs['headers'] = isset($optionalArgs['headers']) ? array_merge($requestParams->getHeader(), $optionalArgs['headers']) : $requestParams->getHeader();
        return $this->startOperationsCall('UpdateTable', $optionalArgs, $request, $this->getOperationsClient())->wait();
    }
}